The Pin,grooved,headed, cataloged under National Stock Number 5315-01-197-7484, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. The manufacturer of record is Deere & Co. Government technical data includes 16 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-197-7484 |
| Primary Part Number | T21118 |
| Item Name | Pin,grooved,headed |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Manufacturer | Deere & Co |
| Status | ACTIVE |
| First End Taper Length | 0.270 INCHES NOMINAL IN |
| Undercut Diameter | 1.305 INCHES NOMINAL IN |
| Hole Arrangement Style | ONE END DRILLED |
| Under Head Length | 2.890 INCHES NOMINAL IN |
| First End Style | CHAMFERED |
| First Hole Diameter | 0.266 INCHES NOMINAL IN |
| Hardness Rating | 56.0 ROCKWELL C MINIMUM OVERALL |
| Style Designator | GROOVE |
| Pin Head Diameter | 1.750 INCHES NOMINAL IN |
| Diameter | 1.362 INCHES MINIMUM AND 1.368 INCHES MAXIMUM IN |
| First End Taper Angle | 30.0 DEGREES NOMINAL |
| Head Style | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) |
| Height | 0.260 INCHES NOMINAL IN |
| Undercut Radius | 0.030 INCHES NOMINAL IN |
| Material | STEEL COMP 1117 OR STEEL COMP 1018 OVERALL |
| Distance From Centerline of Hole to End of Pin | 0.340 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| T21118 PRIMARY | Deere & Co (USA) |
NSN 5315-01-197-7484 is a Pin,grooved,headed, manufactured by Deere & Co, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
NSN 5315-01-197-7484 has 1 manufacturer part number on file: T21118 (Deere & Co).
Key specifications for T21118: First End Taper Length: 0.270 INCHES NOMINAL IN; Undercut Diameter: 1.305 INCHES NOMINAL IN; Hole Arrangement Style: ONE END DRILLED; Under Head Length: 2.890 INCHES NOMINAL IN. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.