The Pin,grooved,headless, cataloged under National Stock Number 5315-01-195-5233, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. The manufacturer of record is Deere & Co. Government technical data includes 14 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-195-5233 |
| Primary Part Number | T41479 |
| Item Name | Pin,grooved,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Manufacturer | Deere & Co |
| Status | ACTIVE |
| Undercut Width | 0.056 INCHES MINIMUM AND 0.064 INCHES MAXIMUM IN |
| First End Taper Length | 0.060 INCHES NOMINAL IN |
| Undercut Diameter | 1.118 INCHES MINIMUM AND 1.134 INCHES MAXIMUM IN |
| First End Location | BOTH ENDS |
| Hole Arrangement Style | DRILLED THRU CENTER |
| First End Style | CHAMFERED |
| First Hole Diameter | 0.578 INCHES NOMINAL IN |
| Hardness Rating | 88.0 ROCKWELL SUPERFICIAL 15-N MINIMUM OVERALL |
| Style Designator | GROOVE |
| Diameter | 1.250 INCHES NOMINAL IN |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Second End Relationship with First End | IDENTICAL |
| Effective Length | 2.484 INCHES NOMINAL IN |
| Material | STEEL COMP 1026 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| T41479 PRIMARY | Deere & Co (USA) |
NSN 5315-01-195-5233 is a Pin,grooved,headless, manufactured by Deere & Co, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
NSN 5315-01-195-5233 has 1 manufacturer part number on file: T41479 (Deere & Co).
Key specifications for T41479: Undercut Width: 0.056 INCHES MINIMUM AND 0.064 INCHES MAXIMUM IN; First End Taper Length: 0.060 INCHES NOMINAL IN; Undercut Diameter: 1.118 INCHES MINIMUM AND 1.134 INCHES MAXIMUM IN; First End Location: BOTH ENDS. 14 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.