The Pin,straight,headless, cataloged under National Stock Number 5315-01-186-1355, is classified within Federal Supply Class 5315 (No Item Name Available) of the Hardware and Abrasives group. The primary manufacturer of record is Link-Belt Cranes, L.p., Lllp. Government technical data includes 10 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 1 commercial cross-reference from 1 manufacturer, enabling identification through both NSN and commercial part number lookups. 1 verified substitute exists in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-186-1355 |
| Primary Part Number | 9D34 |
| Item Name | Pin,straight,headless |
| FSC / FSG | 5315 / 53 — No Item Name Available |
| Manufacturer | Link-Belt Cranes, L.p., Lllp |
| Status | ACTIVE |
| Hardness Rating | 248.0 BRINELL HULTGREN MINIMUM AND 293.0 BRINELL HULTGREN MAXIMUM OVERALL |
| Hole Arrangement Style | DRILLED THRU CENTER |
| Material | STEEL COMP 4140 OVERALL |
| First Hole Diameter | 0.891 INCHES MINIMUM AND 0.907 INCHES MAXIMUM IN |
| Pin Overall Length | 3.000 INCHES MINIMUM AND 3.062 INCHES MAXIMUM IN |
| Pin Overall Diameter | 1.3710 INCHES MINIMUM AND 1.3750 INCHES MAXIMUM IN |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Second End Relationship with First End | IDENTICAL |
| First End Taper Length | 0.062 INCHES NOMINAL IN |
| First End Style | CHAMFERED |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 9D34 PRIMARY | Link-Belt Cranes, L.p., Lllp (USA) |
NSN 5315-01-186-1355 is a Pin,straight,headless, manufactured by Link-Belt Cranes, L.p., Lllp, classified under FSC 5315 (No Item Name Available). Status: active.
NSN 5315-01-186-1355 has 1 cross-referenced part number: 9D34 (Link-Belt Cranes, L.p., Lllp).
There is 1 known substitute for 5315-01-186-1355: 4820-01-294-6005. Verify interchangeability with system specifications before substitution.
Key specifications for 9D34: Hardness Rating: 248.0 BRINELL HULTGREN MINIMUM AND 293.0 BRINELL HULTGREN MAXIMUM OVERALL; Hole Arrangement Style: DRILLED THRU CENTER; Material: STEEL COMP 4140 OVERALL; First Hole Diameter: 0.891 INCHES MINIMUM AND 0.907 INCHES MAXIMUM IN. 10 total characteristics are documented in the Federal Logistics Information System.