The Pin,grooved,headless, cataloged under National Stock Number 5315-01-184-2110, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-184-2110 |
| Item Name | Pin,grooved,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES OUTSIDE DIAMETER |
| Undercut Width | 0.056 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN |
| First End Taper Length | 0.090 INCHES NOMINAL IN |
| Undercut Diameter | 1.287 INCHES MINIMUM AND 1.295 INCHES MAXIMUM IN |
| First End Location | CHAMFERED END |
| Hole Arrangement Style | ONE END DRILLED |
| First End Style | CHAMFERED |
| First Hole Diameter | 0.328 INCHES NOMINAL IN |
| Hardness Rating | 56.0 ROCKWELL C MINIMUM AND 60.0 ROCKWELL C MAXIMUM OVERALL |
| Style Designator | GROOVE |
| Diameter | 1.3714 INCHES MINIMUM AND 1.3730 INCHES MAXIMUM IN |
| First End Taper Angle | 30.0 DEGREES NOMINAL |
| Second End Relationship with First End | NOT IDENTICAL |
| Effective Length | 7.035 INCHES NOMINAL IN |
| Second End Style | SQUARE |
| Distance From Centerline of Hole to End of Pin | 0.375 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 5035597-101 | 3/2 Design control — primary reference U.S. Government activity |
| 5035597-101 | 5/9 Secondary reference Signals Warfare Project Manager |
NSN 5315-01-184-2110 is a Pin,grooved,headless, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-01-184-2110: Surface Finish: 32.0 MICROINCHES OUTSIDE DIAMETER; Undercut Width: 0.056 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN; First End Taper Length: 0.090 INCHES NOMINAL IN; Undercut Diameter: 1.287 INCHES MINIMUM AND 1.295 INCHES MAXIMUM IN. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.