The Pin,straight,headed, cataloged under National Stock Number 5315-01-177-5964, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. The manufacturer of record is General Electric Company. Government technical data includes 15 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-177-5964 |
| Primary Part Number | 9510M49P01 |
| Item Name | Pin,straight,headed |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Manufacturer | General Electric Company |
| Status | ACTIVE |
| Surface Finish | 125.0 MICROINCHES OVERALL |
| Width Across Flats | 0.175 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN |
| Chamfer Length | 0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN |
| Hole Arrangement Style | ONE END DRILLED |
| Under Head Length | 0.540 INCHES MINIMUM AND 0.560 INCHES MAXIMUM IN |
| Pin Chamfer Angle | 45.0 DEGREES NOMINAL |
| First Hole Diameter | 0.066 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN |
| Style Designator | STRAIGHT |
| Pin Head Diameter | 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN |
| Material Document and Classification | AMS 5759,L605 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Diameter | 0.148 INCHES MINIMUM AND 0.152 INCHES MAXIMUM IN |
| Head Style | ROUND W/WRENCH FLATS |
| Height | 0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN |
| Material | STEEL CORROSION RESISTING OVERALL |
| Distance From Centerline of Hole to End of Pin | 0.096 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 9510M49P01 PRIMARY | General Electric Company (USA) |
NSN 5315-01-177-5964 is a Pin,straight,headed, manufactured by General Electric Company, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
NSN 5315-01-177-5964 has 1 manufacturer part number on file: 9510M49P01 (General Electric Company).
Key specifications for 9510M49P01: Surface Finish: 125.0 MICROINCHES OVERALL; Width Across Flats: 0.175 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN; Chamfer Length: 0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN; Hole Arrangement Style: ONE END DRILLED. 15 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.