The Pin,shoulder,headless, cataloged under National Stock Number 5315-01-176-7460, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 23 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-176-7460 |
| Item Name | Pin,shoulder,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Surface Finish | 63.0 MICROINCHES OUTSIDE DIAMETER |
| First End Taper Length | 0.0625 INCHES NOMINAL IN |
| First Step Diameter | 0.4385 INCHES MINIMUM AND 0.4390 INCHES MAXIMUM IN |
| First End Location | THREADED END |
| Third Step Diameter | 0.375 INCHES NOMINAL IN |
| Second End Taper Angle | 45.0 DEGREES NOMINAL |
| Thread Length | 0.750 INCHES NOMINAL IN |
| First End Style | CHAMFERED |
| Second Step Length | 3.9375 INCHES NOMINAL IN |
| Style Designator | SHOULDER |
| Material Document and Classification | C50AF557A,FSCM 03502 MFR REF SINGLE MATERIAL RESPONSE OR MIL-S-869,CLASS D,COND 4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Second End Taper Length | 0.0625 INCHES NOMINAL IN |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Second End Relationship with First End | NOT IDENTICAL |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.375 INCHES IN |
| Second Step Diameter | 0.383 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN |
| First Step Length | 0.750 INCHES NOMINAL IN |
| Second End Style | CHAMFERED |
| Thread Class | 3A A |
| Material | STEEL OVERALL |
| Thread Series Designator | UNF |
| Third Step Length | 0.750 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 101A837AF1 | 5/9 Secondary reference General Electric Co Naval and Drive Turbine Systems Dept |
| 3294997 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5315-01-176-7460 is a Pin,shoulder,headless, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-01-176-7460: Surface Finish: 63.0 MICROINCHES OUTSIDE DIAMETER; First End Taper Length: 0.0625 INCHES NOMINAL IN; First Step Diameter: 0.4385 INCHES MINIMUM AND 0.4390 INCHES MAXIMUM IN; First End Location: THREADED END. 23 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.