The Pin,straight,headed, cataloged under National Stock Number 5315-01-176-5151, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. The manufacturer of record is General Electric Company. Government technical data includes 18 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-176-5151 |
| Primary Part Number | 3020M35P04 |
| Item Name | Pin,straight,headed |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Manufacturer | General Electric Company |
| Status | ACTIVE |
| Surface Finish | 63.0 MICROINCHES ALL OTHER SURFACES |
| Surface Finish | 125.0 MICROINCHES OUTSIDE DIAMETER |
| Chamfer Length | 0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN |
| Hole Arrangement Style | BOTH END DRILLED |
| Under Head Length | 0.845 INCHES MINIMUM AND 0.865 INCHES MAXIMUM IN |
| Pin Chamfer Angle | 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM |
| First Hole Diameter | 0.035 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN |
| Hardness Rating | 55.0 ROCKWELL C NOMINAL OVERALL |
| Style Designator | STRAIGHT |
| Pin Head Diameter | 0.170 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN |
| Material Document and Classification | AMS 5630 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Diameter | 0.090 INCHES MINIMUM AND 0.094 INCHES MAXIMUM IN |
| Second Hole Diameter | 0.035 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN |
| Head Style | FLAT FILLISTER |
| Center to Center Distance Between Holes | 0.830 INCHES NOMINAL IN |
| Height | 0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM IN |
| Material | STEEL OVERALL |
| Distance From Centerline of Hole to End of Pin | 0.073 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 3020M35P04 PRIMARY | General Electric Company (USA) |
NSN 5315-01-176-5151 is a Pin,straight,headed, manufactured by General Electric Company, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
NSN 5315-01-176-5151 has 1 manufacturer part number on file: 3020M35P04 (General Electric Company).
Key specifications for 3020M35P04: Surface Finish: 63.0 MICROINCHES ALL OTHER SURFACES; Surface Finish: 125.0 MICROINCHES OUTSIDE DIAMETER; Chamfer Length: 0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN; Hole Arrangement Style: BOTH END DRILLED. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.