The Pin,shoulder,headless, cataloged under National Stock Number 5315-01-174-7113, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. The manufacturer of record is General Electric Company. Government technical data includes 18 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-174-7113 |
| Primary Part Number | 9942M14P01 |
| Item Name | Pin,shoulder,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Manufacturer | General Electric Company |
| Status | ACTIVE |
| Shank Diameter | 0.1898 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM IN |
| Second Shank Diameter | 0.1988 INCHES MINIMUM AND 0.1990 INCHES MAXIMUM IN |
| Surface Finish | 32.0 MICROINCHES BOTH ENDS |
| Surface Finish | 125.0 MICROINCHES ALL OTHER SURFACES |
| First End Taper Length | 0.010 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN |
| First End Location | SHORT SHANK END |
| Second End Taper Angle | 15.0 DEGREES MINIMUM AND 25.0 DEGREES MAXIMUM |
| First End Style | CHAMFERED |
| Shank Length | 0.085 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN |
| Style Designator | SHOULDER |
| Material Document and Classification | AMS 5709 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Second End Taper Length | 0.085 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Second End Relationship with First End | NOT IDENTICAL |
| Shoulder Diameter | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN |
| Second Shank Length | 0.170 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN |
| Second End Style | CHAMFERED |
| Material | STEEL OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 9942M14P01 PRIMARY | General Electric Company (USA) |
NSN 5315-01-174-7113 is a Pin,shoulder,headless, manufactured by General Electric Company, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
NSN 5315-01-174-7113 has 1 manufacturer part number on file: 9942M14P01 (General Electric Company).
1 possible match (shared part number, not a government interchangeability claim): 5315-01-191-7878. Verify interchangeability with system specifications before substitution.
Key specifications for 9942M14P01: Shank Diameter: 0.1898 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM IN; Second Shank Diameter: 0.1988 INCHES MINIMUM AND 0.1990 INCHES MAXIMUM IN; Surface Finish: 32.0 MICROINCHES BOTH ENDS; Surface Finish: 125.0 MICROINCHES ALL OTHER SURFACES. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.