The Pin,grooved,headless, cataloged under National Stock Number 5315-01-174-3020, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. The manufacturer of record is Morris Material Handling, Inc.. Government technical data includes 13 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-174-3020 |
| Primary Part Number | 219P223 |
| Item Name | Pin,grooved,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Manufacturer | Morris Material Handling, Inc. |
| Status | ACTIVE |
| Undercut Width | 0.531 INCHES NOMINAL IN |
| First End Taper Length | 0.188 INCHES NOMINAL IN |
| Undercut Diameter | 2.125 INCHES NOMINAL IN |
| First End Location | BOTH ENDS |
| First End Style | CHAMFERED |
| Hardness Rating | 45.0 ROCKWELL C MINIMUM AND 55.0 ROCKWELL C MAXIMUM OVERALL |
| Style Designator | GROOVE |
| Material Document and Classification | 97,FSCM 27315 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| Diameter | 3.125 INCHES MINIMUM AND 3.130 INCHES MAXIMUM IN |
| First End Taper Angle | 30.0 DEGREES NOMINAL |
| Second End Relationship with First End | IDENTICAL |
| Effective Length | 6.437 INCHES NOMINAL IN |
| Material | STEEL OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 219P223 PRIMARY | Morris Material Handling, Inc. (USA) |
NSN 5315-01-174-3020 is a Pin,grooved,headless, manufactured by Morris Material Handling, Inc., classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
NSN 5315-01-174-3020 has 1 manufacturer part number on file: 219P223 (Morris Material Handling, Inc.).
Key specifications for 219P223: Undercut Width: 0.531 INCHES NOMINAL IN; First End Taper Length: 0.188 INCHES NOMINAL IN; Undercut Diameter: 2.125 INCHES NOMINAL IN; First End Location: BOTH ENDS. 13 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.