PartsTable TECHNICAL DATA SHEET
NSN 5315-01-170-6456Government record, cited

Pin, Straight, Headless5315-01-170-6456

NSN 5315-01-170-6456 · NIIN 011706456 · Part number 219T484
Morris Material Handling, Inc. · FSC 5315 — Nails, Machine Keys, and Pins · FSG 53 — Hardware and Abrasives · CAGE 27315
Government record, cited
NSN 5315-01-170-6456 — this item is cataloged by the U.S. Government under National Stock Number 5315-01-170-6456. Manufacturer of record part number: 219T484.
Also searched as  5315-01-170-6456 · 5315011706456 · NIIN 011706456 · 01-170-6456 · FSC 5315 Nails, Machine Keys, and Pins · CAGE 27315 · 219T484
Nearby stock numbers  ·
Features
  • Pin,straight,headless — FSC 5315
  • Surface Finish: 32.0 MICROINCHES OUTSIDE DIAMETER
  • First End Taper Length: 0.125 INCHES NOMINAL IN
  • Hole Arrangement Style: ONE END DRILLED
  • First End Style: CHAMFERED
  • First Hole Diameter: 0.4062 INCHES NOMINAL IN
  • Material Document and Classification: 132,FSCM 27315 MFR REF 1ST MATERIAL RESPONSE OR AISI ASSN STD 2ND MATERIAL RESPONSE OVERALL
  • First End Taper Angle: 30.0 DEGREES NOMINAL
Identification
  • NSN: 5315-01-170-6456
  • NIIN: 011706456
  • FSC: 5315 — Nails, Machine Keys, and Pins
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: 219T484
  • Manufacturer: Morris Material Handling, Inc.
General Description

The Pin,straight,headless, cataloged under National Stock Number 5315-01-170-6456, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. The manufacturer of record is Morris Material Handling, Inc.. Government technical data includes 12 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5315-01-170-6456
Primary Part Number219T484
Item NamePin,straight,headless
FSC / FSG5315 / 53 — Nails, Machine Keys, and Pins
ManufacturerMorris Material Handling, Inc.
StatusACTIVE
Surface Finish32.0 MICROINCHES OUTSIDE DIAMETER
First End Taper Length0.125 INCHES NOMINAL IN
Hole Arrangement StyleONE END DRILLED
First End StyleCHAMFERED
First Hole Diameter0.4062 INCHES NOMINAL IN
Material Document and Classification132,FSCM 27315 MFR REF 1ST MATERIAL RESPONSE OR AISI ASSN STD 2ND MATERIAL RESPONSE OVERALL
First End Taper Angle30.0 DEGREES NOMINAL
Pin Overall Diameter1.1244 INCHES MINIMUM AND 1.1254 INCHES MAXIMUM IN
Pin Overall Length6.188 INCHES NOMINAL IN
Second End Relationship with First EndIDENTICAL
MaterialSTEEL OR STEEL COMP 1045 OVERALL
Distance From Centerline of Hole to End of Pin0.500 INCHES NOMINAL IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
219T484 PRIMARY Morris Material Handling, Inc. (USA)
No interchangeability data on file.
Other items in FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037
5315-00-000-1037 · Item name not on file
5315-00-000-1067
5315-00-000-1067 · Item name not on file
5315-00-000-1245
5315-00-000-1245 · Item name not on file
5315-00-000-1372
5315-00-000-1372 · Item name not on file
5315-00-000-1412
5315-00-000-1412 · Item name not on file
5315-00-001-1571
PIN
5315-00-001-1572
PIN,LINKAGE
5315-00-001-1602
5315-00-001-1602 · Item name not on file

Frequently Asked Questions

What is NSN 5315-01-170-6456?

NSN 5315-01-170-6456 is a Pin,straight,headless, manufactured by Morris Material Handling, Inc., classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.

What part numbers are listed for NSN 5315-01-170-6456?

NSN 5315-01-170-6456 has 1 manufacturer part number on file: 219T484 (Morris Material Handling, Inc.).

What are the specifications of 219T484?

Key specifications for 219T484: Surface Finish: 32.0 MICROINCHES OUTSIDE DIAMETER; First End Taper Length: 0.125 INCHES NOMINAL IN; Hole Arrangement Style: ONE END DRILLED; First End Style: CHAMFERED. 12 specifications are documented in the U.S. Government catalog.

Is NSN 5315-01-170-6456 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com