The Pin,straight,headless, cataloged under National Stock Number 5315-01-170-3209, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. The manufacturer of record is Morris Material Handling, Inc.. Government technical data includes 14 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-170-3209 |
| Primary Part Number | 219T534 |
| Item Name | Pin,straight,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Manufacturer | Morris Material Handling, Inc. |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES OUTSIDE DIAMETER |
| First End Taper Length | 0.125 INCHES NOMINAL IN |
| Hole Arrangement Style | BOTH END DRILLED |
| First End Style | CHAMFERED |
| First Hole Diameter | 0.3440 INCHES NOMINAL IN |
| Material Document and Classification | P&H 97,FSCM 27315 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| First End Taper Angle | 30.0 DEGREES NOMINAL |
| Pin Overall Diameter | 1.7494 INCHES MINIMUM AND 1.7504 INCHES MAXIMUM IN |
| Pin Overall Length | 11.752 INCHES MINIMUM AND 11.872 INCHES MAXIMUM IN |
| Second End Relationship with First End | IDENTICAL |
| Second Hole Diameter | 0.3440 INCHES NOMINAL IN |
| Center to Center Distance Between Holes | 11.022 INCHES MINIMUM AND 11.102 INCHES MAXIMUM IN |
| Material | STEEL OVERALL |
| Distance From Centerline of Hole to End of Pin | 0.335 INCHES MINIMUM AND 0.415 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 219T534 PRIMARY | Morris Material Handling, Inc. (USA) |
NSN 5315-01-170-3209 is a Pin,straight,headless, manufactured by Morris Material Handling, Inc., classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
NSN 5315-01-170-3209 has 1 manufacturer part number on file: 219T534 (Morris Material Handling, Inc.).
Key specifications for 219T534: Surface Finish: 32.0 MICROINCHES OUTSIDE DIAMETER; First End Taper Length: 0.125 INCHES NOMINAL IN; Hole Arrangement Style: BOTH END DRILLED; First End Style: CHAMFERED. 14 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.