The Pin,grooved,headed, cataloged under National Stock Number 5315-01-169-8519, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. The manufacturer of record is Morris Material Handling, Inc.. Government technical data includes 15 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-169-8519 |
| Primary Part Number | 219T654F1 |
| Item Name | Pin,grooved,headed |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Manufacturer | Morris Material Handling, Inc. |
| Status | ACTIVE |
| First End Taper Length | 0.188 INCHES NOMINAL IN |
| Hole Arrangement Style | ONE END DRILLED |
| Head Width | 4.500 INCHES NOMINAL IN |
| Under Head Length | 6.500 INCHES NOMINAL IN |
| First End Style | CHAMFERED |
| First Hole Diameter | 0.521 INCHES MINIMUM AND 0.551 INCHES MAXIMUM IN |
| Hardness Rating | 50.0 ROCKWELL C MINIMUM AND 55.0 ROCKWELL C MAXIMUM OVERALL |
| Material Document and Classification | PH132,FSCM 27315 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| Diameter | 3.120 INCHES MINIMUM AND 3.123 INCHES MAXIMUM IN |
| First End Taper Angle | 30.0 DEGREES NOMINAL |
| Head Style | SQUARE |
| Height | 0.750 INCHES NOMINAL IN |
| Internal Drive Style | RECESSED TYPE I |
| Material | STEEL OVERALL |
| Distance From Centerline of Hole to End of Pin | 0.625 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 219T654F1 PRIMARY | Morris Material Handling, Inc. (USA) |
NSN 5315-01-169-8519 is a Pin,grooved,headed, manufactured by Morris Material Handling, Inc., classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
NSN 5315-01-169-8519 has 1 manufacturer part number on file: 219T654F1 (Morris Material Handling, Inc.).
Key specifications for 219T654F1: First End Taper Length: 0.188 INCHES NOMINAL IN; Hole Arrangement Style: ONE END DRILLED; Head Width: 4.500 INCHES NOMINAL IN; Under Head Length: 6.500 INCHES NOMINAL IN. 15 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.