The Pin,grooved,headed, cataloged under National Stock Number 5315-01-169-0168, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. The manufacturer of record is Morris Material Handling, Inc.. Government technical data includes 18 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-169-0168 |
| Primary Part Number | 20T5702 |
| Item Name | Pin,grooved,headed |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Manufacturer | Morris Material Handling, Inc. |
| Status | ACTIVE |
| Undercut Width | 0.375 INCHES NOMINAL IN |
| First End Taper Length | 0.125 INCHES NOMINAL IN |
| Undercut Diameter | 1.688 INCHES NOMINAL IN |
| Hole Arrangement Style | ONE END DRILLED |
| Under Head Length | 7.250 INCHES NOMINAL IN |
| First End Style | CHAMFERED |
| First Hole Diameter | 0.406 INCHES NOMINAL IN |
| Hardness Rating | 55.0 ROCKWELL C MINIMUM OVERALL |
| Style Designator | GROOVE |
| Pin Head Diameter | 2.750 INCHES NOMINAL IN |
| Material Document and Classification | 104,FSCM 27315 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| Diameter | 1.9973 INCHES MINIMUM AND 1.9985 INCHES MAXIMUM IN |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Effective Length | 4.875 INCHES NOMINAL IN |
| Head Style | FLAT |
| Height | 0.500 INCHES NOMINAL IN |
| Material | STEEL OVERALL |
| Distance From Centerline of Hole to End of Pin | 0.625 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 20T5702 PRIMARY | Morris Material Handling, Inc. (USA) |
NSN 5315-01-169-0168 is a Pin,grooved,headed, manufactured by Morris Material Handling, Inc., classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
NSN 5315-01-169-0168 has 1 manufacturer part number on file: 20T5702 (Morris Material Handling, Inc.).
Key specifications for 20T5702: Undercut Width: 0.375 INCHES NOMINAL IN; First End Taper Length: 0.125 INCHES NOMINAL IN; Undercut Diameter: 1.688 INCHES NOMINAL IN; Hole Arrangement Style: ONE END DRILLED. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.