The Pin,shoulder,headless, cataloged under National Stock Number 5315-01-167-1112, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 25 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-167-1112 |
| Item Name | Pin,shoulder,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Shank Diameter | 0.2491 INCHES MINIMUM AND 0.2496 INCHES MAXIMUM IN |
| Second Shank Diameter | 0.2495 INCHES MINIMUM AND 0.2505 INCHES MAXIMUM IN |
| Surface Finish | 32.0 MICROINCHES LONG SHANK |
| Surface Finish | 63.0 MICROINCHES LARGE SHANK |
| Surface Finish | 63.0 MICROINCHES BEARING |
| First End Taper Length | 0.040 INCHES MAXIMUM IN |
| First End Location | THREADED END |
| Second End Taper Angle | 14.0 DEGREES MINIMUM AND 16.0 DEGREES MAXIMUM |
| Thread Length | 0.360 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN |
| First End Style | CHAMFERED |
| Hardness Rating | 30.0 ROCKWELL C MINIMUM AND 36.0 ROCKWELL C MAXIMUM OVERALL |
| Shank Length | 0.790 INCHES MINIMUM AND 0.820 INCHES MAXIMUM IN |
| Style Designator | SHOULDER |
| Material Document and Classification | AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Second End Taper Length | 0.100 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN |
| First End Taper Angle | 50.0 DEGREES NOMINAL |
| Second End Relationship with First End | NOT IDENTICAL |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.250 INCHES IN |
| Second Shank Length | 0.660 INCHES MINIMUM AND 0.680 INCHES MAXIMUM IN |
| Shoulder Width Across Flats | 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM IN |
| Second End Style | CHAMFERED |
| Thread Class | 3A A |
| Material | IRON ALLOY 660 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | F |
| Reference | Meaning |
|---|---|
| 3008T82P01 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5315-01-167-1112 is a Pin,shoulder,headless, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-01-167-1112: Shank Diameter: 0.2491 INCHES MINIMUM AND 0.2496 INCHES MAXIMUM IN; Second Shank Diameter: 0.2495 INCHES MINIMUM AND 0.2505 INCHES MAXIMUM IN; Surface Finish: 32.0 MICROINCHES LONG SHANK; Surface Finish: 63.0 MICROINCHES LARGE SHANK. 25 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.