The Pin,grooved,headed, cataloged under National Stock Number 5315-01-148-9795, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-148-9795 |
| Item Name | Pin,grooved,headed |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES OVERALL |
| Undercut Width | 0.062 INCHES NOMINAL IN |
| Undercut Diameter | 0.406 INCHES NOMINAL IN |
| Surface Treatment Document and Classification | QQ-P-35 TYPE 1 FED SPEC SINGLE TREATMENT RESPONSE OR QQ-P-35 TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE OR QQ-P-35 TYPE 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Under Head Length | 1.143 INCHES NOMINAL IN |
| First End Slot Width | 0.250 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN |
| First End Style | ROUND |
| Hardness Rating | 36.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM OVERALL |
| Style Designator | GROOVE |
| Pin Head Diameter | 0.470 INCHES MINIMUM AND 0.475 INCHES MAXIMUM IN |
| Material Document and Classification | AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Diameter | 0.435 INCHES MINIMUM AND 0.436 INCHES MAXIMUM IN |
| Head Style | FLAT FILLISTER |
| First End Slot Depth | 0.156 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN |
| Height | 0.062 INCHES NOMINAL IN |
| Surface Treatment | PASSIVATE OVERALL |
| Internal Drive Style | TORQUE |
| Material | STEEL COMP 630 OVERALL |
| First End Outer Radius | 0.245 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 1532340 | 3/9 Design control — primary reference Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier |
| 5315PL0889252 | 6/9 Informative reference only Jednolity Indeks Materialowy - Uniform Material Index |
NSN 5315-01-148-9795 is a Pin,grooved,headed, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 4720-01-474-2631. Verify interchangeability with system specifications before substitution.
Key specifications for 5315-01-148-9795: Surface Finish: 32.0 MICROINCHES OVERALL; Undercut Width: 0.062 INCHES NOMINAL IN; Undercut Diameter: 0.406 INCHES NOMINAL IN; Surface Treatment Document and Classification: QQ-P-35 TYPE 1 FED SPEC SINGLE TREATMENT RESPONSE OR QQ-P-35 TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE OR QQ-P-35 TYPE 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.