The Pin,grooved,headed, cataloged under National Stock Number 5315-01-143-6793, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-143-6793 |
| Item Name | Pin,grooved,headed |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Surface Finish | 63.0 MICROINCHES OUTSIDE DIAMETER |
| Undercut Width | 0.062 INCHES NOMINAL IN |
| Undercut Diameter | 0.593 INCHES NOMINAL IN |
| Surface Treatment Document and Classification | QQ-P-35,TYPE 1,TYPE2,OR TYPE3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Under Head Length | 1.078 INCHES NOMINAL IN |
| First End Style | SQUARE |
| Hardness Rating | 36.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM OVERALL |
| Style Designator | GROOVE |
| Pin Head Diameter | 0.750 INCHES NOMINAL IN |
| Material Document and Classification | AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Diameter | 0.623 INCHES MINIMUM AND 0.624 INCHES MAXIMUM IN |
| Head Style | FLAT |
| Height | 0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Internal Drive Style | TORQUE |
| Material | STEEL COMP 630 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 1532347 | 3/9 Design control — primary reference Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier |
| 5315PL0893170 | 6/9 Informative reference only Jednolity Indeks Materialowy - Uniform Material Index |
NSN 5315-01-143-6793 is a Pin,grooved,headed, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-01-143-6793: Surface Finish: 63.0 MICROINCHES OUTSIDE DIAMETER; Undercut Width: 0.062 INCHES NOMINAL IN; Undercut Diameter: 0.593 INCHES NOMINAL IN; Surface Treatment Document and Classification: QQ-P-35,TYPE 1,TYPE2,OR TYPE3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.