PartsTable TECHNICAL DATA SHEET
NSN 5315-01-132-8782Government record, cited

Pin, Shoulder, Headless5315-01-132-8782

NSN 5315-01-132-8782 · NIIN 011328782
FSC 5315 — Nails, Machine Keys, and Pins · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5315-01-132-8782 · 5315011328782 · NIIN 011328782 · 01-132-8782 · FSC 5315 Nails, Machine Keys, and Pins · 4491146-A-12 · 4491146-F-12
Nearby stock numbers  ·
Features
  • Pin,shoulder,headless — FSC 5315
  • First Step Diameter: 1.250 INCHES NOMINAL IN
  • First End Location: SHOULDER END
  • Third Step Diameter: 0.750 INCHES NOMINAL IN
  • Second End Taper Angle: 45.0 DEGREES NOMINAL
  • Thread Length: 1.437 INCHES NOMINAL IN
  • First End Style: SQUARE
  • Second Step Length: 5.938 INCHES NOMINAL IN
Identification
  • NSN: 5315-01-132-8782
  • NIIN: 011328782
  • FSC: 5315 — Nails, Machine Keys, and Pins
  • FSG: 53 — Hardware and Abrasives
General Description

The Pin,shoulder,headless, cataloged under National Stock Number 5315-01-132-8782, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 21 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5315-01-132-8782
Item NamePin,shoulder,headless
FSC / FSG5315 / 53 — Nails, Machine Keys, and Pins
StatusACTIVE
First Step Diameter1.250 INCHES NOMINAL IN
First End LocationSHOULDER END
Third Step Diameter0.750 INCHES NOMINAL IN
Second End Taper Angle45.0 DEGREES NOMINAL
Thread Length1.437 INCHES NOMINAL IN
First End StyleSQUARE
Second Step Length5.938 INCHES NOMINAL IN
Style DesignatorSHOULDER
Material Document and ClassificationQQ-N-286 CL A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
Second End Taper Length0.062 INCHES NOMINAL IN
Second End Relationship with First EndNOT IDENTICAL
Thread DirectionRIGHT-HAND
Nominal Thread Size0.750 INCHES IN
Second Step Diameter0.996 INCHES MINIMUM AND 0.998 INCHES MAXIMUM IN
First Step Length1.500 INCHES NOMINAL IN
Second End StyleCHAMFERED
Thread Class2A A
Thread Quantity Per Inch10
MaterialNICKEL ALLOY K-500 OVERALL
Thread Series DesignatorUNIFIED NATIONAL COARSE (UNC)
Third Step Length1.437 INCHES NOMINAL IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
4491146-A-12 5/9 Secondary reference
Naval Ship Engineering Center Philadelphia Division Submarine Antenna Quality Assurance
4491146-F-12 3/9 Design control — primary reference
Naval Ship Engineering Center Philadelphia Division Submarine Antenna Quality Assurance
No interchangeability data on file.
Other items in FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037
5315-00-000-1037 · Item name not on file
5315-00-000-1067
5315-00-000-1067 · Item name not on file
5315-00-000-1245
5315-00-000-1245 · Item name not on file
5315-00-000-1372
5315-00-000-1372 · Item name not on file
5315-00-000-1412
5315-00-000-1412 · Item name not on file
5315-00-001-1571
PIN
5315-00-001-1572
PIN,LINKAGE
5315-00-001-1602
5315-00-001-1602 · Item name not on file

Frequently Asked Questions

What is NSN 5315-01-132-8782?

NSN 5315-01-132-8782 is a Pin,shoulder,headless, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.

What are the specifications of 5315-01-132-8782?

Key specifications for 5315-01-132-8782: First Step Diameter: 1.250 INCHES NOMINAL IN; First End Location: SHOULDER END; Third Step Diameter: 0.750 INCHES NOMINAL IN; Second End Taper Angle: 45.0 DEGREES NOMINAL. 21 specifications are documented in the U.S. Government catalog.

Is NSN 5315-01-132-8782 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com