The Pin,grooved,headless, cataloged under National Stock Number 5315-01-120-8491, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 20 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-120-8491 |
| Item Name | Pin,grooved,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Undercut Width | 1.200 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN |
| First End Taper Length | 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN |
| Undercut Diameter | 3.786 INCHES MINIMUM AND 3.798 INCHES MAXIMUM IN |
| First End Location | BOTH ENDS |
| First End Counterbore Diameter | 0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM IN |
| Second End Taper Angle | 45.0 DEGREES NOMINAL |
| First End Style | CHAMFERED AND COUNTERBORED |
| Hardness Rating | 45.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL |
| Style Designator | GROOVE |
| Diameter | 3.995 INCHES MINIMUM AND 3.997 INCHES MAXIMUM IN |
| Second End Taper Length | 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Second End Relationship with First End | IDENTICAL |
| Effective Length | 9.410 INCHES MINIMUM AND 9.470 INCHES MAXIMUM IN |
| Second Undercut Width | 1.200 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN |
| Second End Counterbore Diameter | 0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM IN |
| Shear Strength | 140000 SINGLE POUNDS PER SQUARE INCH |
| Material | STEEL COMP 4340 OVERALL |
| Second End Counterbore Depth | 0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM IN |
| First End Counterbore Depth | 0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 13222E3743 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5315-01-120-8491 is a Pin,grooved,headless, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-01-120-8491: Undercut Width: 1.200 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN; First End Taper Length: 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN; Undercut Diameter: 3.786 INCHES MINIMUM AND 3.798 INCHES MAXIMUM IN; First End Location: BOTH ENDS. 20 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.