The Pin,shoulder,headless, cataloged under National Stock Number 5315-01-120-3398, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 29 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-120-3398 |
| Item Name | Pin,shoulder,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Shank Diameter | 0.784 INCHES MINIMUM AND 0.785 INCHES MAXIMUM IN |
| Second Shank Diameter | 0.783 INCHES MINIMUM AND 0.784 INCHES MAXIMUM IN |
| Surface Finish | 125.0 MICROINCHES OVERALL |
| Undercut Width | 5.440 INCHES NOMINAL IN |
| Undercut Diameter | 0.656 INCHES NOMINAL IN |
| First End Location | THREADED END |
| Second End Taper Angle | 15.0 DEGREES NOMINAL |
| Hole Arrangement Style | ONE END W/TWO DRILLED HOLES |
| Thread Length | 0.464 INCHES NOMINAL IN |
| First End Style | SQUARE W/THRU HOLE |
| First Hole Diameter | 0.120 INCHES NOMINAL IN |
| Hardness Rating | 53.0 ROCKWELL C MINIMUM OVERALL |
| Shank Length | 0.560 INCHES NOMINAL IN |
| Style Designator | UNDERCUT |
| Material Document and Classification | QQ-S-763,TYPE440C MIL SPEC ALL MATERIAL RESPONSES OVERALL |
| Second End Taper Length | 0.120 INCHES NOMINAL IN |
| Second End Relationship with First End | NOT IDENTICAL |
| Second Hole Diameter | 0.120 INCHES NOMINAL IN |
| Angle Between Centerline of Holes | 90.0 DEGREES NOMINAL |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.750 INCHES IN |
| Shoulder Diameter | 1.000 INCHES NOMINAL IN |
| Second Shank Length | 2.500 INCHES NOMINAL IN |
| Second End Style | CHAMFERED W/THRU HOLE |
| Thread Class | 2B |
| Thread Quantity Per Inch | 16 |
| Material | STEEL COMP 440C OVERALL |
| Thread Series Designator | UNF |
| Distance From Centerline of Hole to End of Pin | 1.970 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 209-071-405-101 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5315-01-120-3398 is a Pin,shoulder,headless, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-01-120-3398: Shank Diameter: 0.784 INCHES MINIMUM AND 0.785 INCHES MAXIMUM IN; Second Shank Diameter: 0.783 INCHES MINIMUM AND 0.784 INCHES MAXIMUM IN; Surface Finish: 125.0 MICROINCHES OVERALL; Undercut Width: 5.440 INCHES NOMINAL IN. 29 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.