The Pin,straight,headed, cataloged under National Stock Number 5315-01-112-2593, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 14 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-112-2593 |
| Item Name | Pin,straight,headed |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Surface Finish | 125.0 MICROINCHES ALL OTHER SURFACES |
| Chamfer Length | 0.068 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN |
| Hole Arrangement Style | ONE END DRILLED |
| Under Head Length | 1.396 INCHES MINIMUM AND 1.416 INCHES MAXIMUM IN |
| Pin Chamfer Angle | 10.0 DEGREES MINIMUM AND 20.0 DEGREES MAXIMUM |
| First Hole Diameter | 0.094 INCHES MINIMUM AND 0.101 INCHES MAXIMUM IN |
| Style Designator | STRAIGHT |
| Pin Head Diameter | 0.625 INCHES NOMINAL IN |
| Material Document and Classification | AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Diameter | 0.495 INCHES MINIMUM AND 0.497 INCHES MAXIMUM IN |
| Head Style | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) |
| Height | 0.084 INCHES MINIMUM AND 0.104 INCHES MAXIMUM IN |
| Material | STEEL CORROSION RESISTING OVERALL |
| Distance From Centerline of Hole to End of Pin | 0.139 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS9468-22 | 2/2 Government specification standardization U.S. Government activity |
NSN 5315-01-112-2593 is a Pin,straight,headed, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-01-112-2593: Surface Finish: 125.0 MICROINCHES ALL OTHER SURFACES; Chamfer Length: 0.068 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN; Hole Arrangement Style: ONE END DRILLED; Under Head Length: 1.396 INCHES MINIMUM AND 1.416 INCHES MAXIMUM IN. 14 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.