PartsTable TECHNICAL DATA SHEET
NSN 5315-01-093-0064Government record, cited

Pin, Shoulder, Headless5315-01-093-0064

NSN 5315-01-093-0064 · NIIN 010930064
FSC 5315 — Nails, Machine Keys, and Pins · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5315-01-093-0064 · 5315010930064 · NIIN 010930064 · 01-093-0064 · FSC 5315 Nails, Machine Keys, and Pins · 600-4646747 ITEM 3 · 49M61-25R01 ITEM 3
Nearby stock numbers  ·
Features
  • Pin,shoulder,headless — FSC 5315
  • Shank Diameter: 0.887 INCHES MINIMUM AND 0.889 INCHES MAXIMUM IN
  • Surface Finish: 63.0 MICROINCHES OVERALL
  • Undercut Width: 0.180 INCHES NOMINAL IN
  • First End Taper Length: 0.060 INCHES NOMINAL IN
  • Undercut Diameter: 0.704 INCHES NOMINAL IN
  • Second End Countersink Diameter: 0.530 INCHES NOMINAL IN
  • First End Location: SHORT SHANK END
Identification
  • NSN: 5315-01-093-0064
  • NIIN: 010930064
  • FSC: 5315 — Nails, Machine Keys, and Pins
  • FSG: 53 — Hardware and Abrasives
General Description

The Pin,shoulder,headless, cataloged under National Stock Number 5315-01-093-0064, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 22 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5315-01-093-0064
Item NamePin,shoulder,headless
FSC / FSG5315 / 53 — Nails, Machine Keys, and Pins
StatusACTIVE
Shank Diameter0.887 INCHES MINIMUM AND 0.889 INCHES MAXIMUM IN
Surface Finish63.0 MICROINCHES OVERALL
Undercut Width0.180 INCHES NOMINAL IN
First End Taper Length0.060 INCHES NOMINAL IN
Undercut Diameter0.704 INCHES NOMINAL IN
Second End Countersink Diameter0.530 INCHES NOMINAL IN
First End LocationSHORT SHANK END
Thread Length0.500 INCHES MINIMUM IN
First End StyleCHAMFERED
Shank Length0.929 INCHES NOMINAL IN
Style DesignatorUNDERCUT
Material Document and ClassificationMIL-B-24059 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
First End Taper Angle45.0 DEGREES NOMINAL
Second End Relationship with First EndNOT IDENTICAL
Thread DirectionRIGHT-HAND
Nominal Thread Size0.500 INCHES IN
Shoulder Diameter0.990 INCHES MINIMUM AND 0.992 INCHES MAXIMUM IN
Second End StyleCOUNTERSUNK
Thread Class2B
Second End Countersink Angle90.0 DEGREES NOMINAL
MaterialCOPPER ALLOY OVERALL
Thread Series DesignatorUNIFIED NATIONAL COARSE (UNC)
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
600-4646747 ITEM 3 5/2 Secondary reference
U.S. Government activity
49M61-25R01 ITEM 3 3/2 Design control — primary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037
5315-00-000-1037 · Item name not on file
5315-00-000-1067
5315-00-000-1067 · Item name not on file
5315-00-000-1245
5315-00-000-1245 · Item name not on file
5315-00-000-1372
5315-00-000-1372 · Item name not on file
5315-00-000-1412
5315-00-000-1412 · Item name not on file
5315-00-001-1571
PIN
5315-00-001-1572
PIN,LINKAGE
5315-00-001-1602
5315-00-001-1602 · Item name not on file

Frequently Asked Questions

What is NSN 5315-01-093-0064?

NSN 5315-01-093-0064 is a Pin,shoulder,headless, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.

What are the specifications of 5315-01-093-0064?

Key specifications for 5315-01-093-0064: Shank Diameter: 0.887 INCHES MINIMUM AND 0.889 INCHES MAXIMUM IN; Surface Finish: 63.0 MICROINCHES OVERALL; Undercut Width: 0.180 INCHES NOMINAL IN; First End Taper Length: 0.060 INCHES NOMINAL IN. 22 specifications are documented in the U.S. Government catalog.

Is NSN 5315-01-093-0064 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com