The Pin,shoulder,headed, cataloged under National Stock Number 5315-01-060-2759, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. The manufacturer of record is Air Armament Center/ En. Government technical data includes 16 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-060-2759 |
| Primary Part Number | 757056-10 |
| Item Name | Pin,shoulder,headed |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Manufacturer | Air Armament Center/ En |
| Status | ACTIVE |
| First End Taper Length | 0.030 INCHES NOMINAL0.030 INCHES NOMINAL IN |
| First Step Diameter | 0.226 INCHES MINIMUM AND 0.226 INCHES MINIMUM AND 0.228 INCHES MAXIMUM0.228 INCHES MAXIMUM IN |
| Third Step Diameter | 0.123 INCHES MINIMUM AND 0.123 INCHES MINIMUM AND 0.125 INCHES MAXIMUM0.125 INCHES MAXIMUM IN |
| Under Head Length | 1.420 INCHES NOMINAL1.420 INCHES NOMINAL IN |
| First End Style | CHAMFEREDCHAMFERED |
| Second Step Length | 0.312 INCHES NOMINAL0.312 INCHES NOMINAL IN |
| Style Designator | SHOULDER |
| Pin Head Diameter | 0.500 INCHES NOMINAL0.500 INCHES NOMINAL IN |
| Material Document and Classification | QQ-S-764,TYPE 303 COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| First End Taper Angle | 45.0 DEGREES NOMINAL45.0 DEGREES NOMINAL |
| Head Style | FLAT CHAMFERFLAT CHAMFER |
| Second Step Diameter | 0.183 INCHES MINIMUM AND 0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM0.193 INCHES MAXIMUM IN |
| Height | 0.120 INCHES NOMINAL0.120 INCHES NOMINAL IN |
| First Step Length | 0.920 INCHES NOMINAL0.920 INCHES NOMINAL IN |
| Material | STEEL COMP 303 OVERALL |
| Third Step Length | 0.188 INCHES NOMINAL0.188 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 757056-10 PRIMARY | Air Armament Center/ En (USA) |
| Reference | Meaning |
|---|---|
| 757056-10 | 5/9 Secondary reference U.S. Government activity |
| 757056 | 5/2 Secondary reference U.S. Government activity |
NSN 5315-01-060-2759 is a Pin,shoulder,headed, manufactured by Air Armament Center/ En, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
NSN 5315-01-060-2759 has 1 manufacturer part number on file: 757056-10 (Air Armament Center/ En).
1 possible match (shared part number, not a government interchangeability claim): 5331-01-146-9916. Verify interchangeability with system specifications before substitution.
Key specifications for 757056-10: First End Taper Length: 0.030 INCHES NOMINAL0.030 INCHES NOMINAL IN; First Step Diameter: 0.226 INCHES MINIMUM AND 0.226 INCHES MINIMUM AND 0.228 INCHES MAXIMUM0.228 INCHES MAXIMUM IN; Third Step Diameter: 0.123 INCHES MINIMUM AND 0.123 INCHES MINIMUM AND 0.125 INCHES MAXIMUM0.125 INCHES MAXIMUM IN; Under Head Length: 1.420 INCHES NOMINAL1.420 INCHES NOMINAL IN. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.