The Pin,grooved,headed, cataloged under National Stock Number 5315-01-059-7663, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-059-7663 |
| Item Name | Pin,grooved,headed |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Surface Finish | 125.0 MICROINCHES OVERALL |
| Undercut Width | 0.210 INCHES NOMINAL IN |
| First End Taper Length | 0.060 INCHES NOMINAL IN |
| Undercut Diameter | 0.290 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN |
| Under Head Length | 0.688 INCHES NOMINAL IN |
| First End Style | CHAMFERED |
| Style Designator | GROOVE |
| Pin Head Diameter | 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN |
| Material Document and Classification | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Diameter | 0.371 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Effective Length | 0.051 INCHES NOMINAL IN |
| Head Style | FLAT |
| Height | 0.062 INCHES NOMINAL IN |
| Surface Treatment | PASSIVATE OVERALL |
| Material | STEEL COMP 630 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 676282-3 | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
| 676282-3 | 3/9 Design control — primary reference Drs Sustainment Systems, Inc. |
NSN 5315-01-059-7663 is a Pin,grooved,headed, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-01-059-7663: Surface Finish: 125.0 MICROINCHES OVERALL; Undercut Width: 0.210 INCHES NOMINAL IN; First End Taper Length: 0.060 INCHES NOMINAL IN; Undercut Diameter: 0.290 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.