The Pin,grooved,headed, cataloged under National Stock Number 5315-01-056-6022, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-056-6022 |
| Item Name | Pin,grooved,headed |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Surface Finish | 63.0 MICROINCHES OVERALL |
| Undercut Width | 0.018 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN |
| First End Taper Length | 0.005 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN |
| Undercut Diameter | 0.095 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN |
| Under Head Length | 0.573 INCHES MINIMUM AND 0.590 INCHES MAXIMUM IN |
| First End Style | CHAMFERED |
| Hardness Rating | 48.0 ROCKWELL C NOMINAL OVERALL |
| Style Designator | GROOVE |
| Pin Head Diameter | 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN |
| Diameter | 0.122 INCHES MINIMUM AND 0.123 INCHES MAXIMUM IN |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Effective Length | 0.530 INCHES MINIMUM AND 0.535 INCHES MAXIMUM IN |
| Head Style | FLAT CHAMFER |
| Height | 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Material | STEEL OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 645287-2 | 3/2 Design control — primary reference U.S. Government activity |
| 645287-2 | 5/9 Secondary reference U.S. Government activity |
NSN 5315-01-056-6022 is a Pin,grooved,headed, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-01-056-6022: Surface Finish: 63.0 MICROINCHES OVERALL; Undercut Width: 0.018 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN; First End Taper Length: 0.005 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN; Undercut Diameter: 0.095 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.