The Pin,straight,headed, cataloged under National Stock Number 5315-01-035-9380, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 14 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-035-9380 |
| Item Name | Pin,straight,headed |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Surface Treatment Document and Classification | 171,FINISH NO. 5.4.1 MIL STD SINGLE TREATMENT RESPONSE OVERALL |
| Hole Arrangement Style | ONE END DRILLED |
| Under Head Length | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN |
| First Hole Diameter | 0.046 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN |
| Hardness Rating | 55.0 ROCKWELL C MINIMUM AND 60.0 ROCKWELL C MAXIMUM OVERALL |
| Style Designator | STRAIGHT |
| Pin Head Diameter | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN |
| Material Document and Classification | QQ-S-764 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Diameter | 0.152 INCHES MINIMUM AND 0.154 INCHES MAXIMUM IN |
| Head Style | FLAT |
| Height | 0.065 INCHES MINIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Material | STEEL COMP 440C OVERALL |
| Distance From Centerline of Hole to End of Pin | 0.039 INCHES MINIMUM AND 0.059 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 86397 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5315-01-035-9380 is a Pin,straight,headed, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-01-035-9380: Surface Treatment Document and Classification: 171,FINISH NO. 5.4.1 MIL STD SINGLE TREATMENT RESPONSE OVERALL; Hole Arrangement Style: ONE END DRILLED; Under Head Length: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN; First Hole Diameter: 0.046 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN. 14 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.