The Pin,grooved,headless, cataloged under National Stock Number 5315-01-033-6085, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 15 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-033-6085 |
| Item Name | Pin,grooved,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Surface Finish | 63.0 MICROINCHES OVERALL |
| Undercut Width | 0.125 INCHES NOMINAL IN |
| Undercut Diameter | 0.504 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN |
| First End Location | BOTH ENDS |
| Hole Arrangement Style | DRILLED THRU CENTER |
| First End Style | SQUARE |
| First Hole Diameter | 0.141 INCHES NOMINAL IN |
| Hardness Rating | 30.0 ROCKWELL C MINIMUM AND 33.0 ROCKWELL C MAXIMUM OVERALL |
| Style Designator | GROOVE |
| Diameter | 0.589 INCHES NOMINAL IN |
| Second End Relationship with First End | IDENTICAL |
| Effective Length | 1.281 INCHES NOMINAL IN |
| Second Undercut Width | 0.125 INCHES NOMINAL IN |
| Shear Strength | 40000 SINGLE POUNDS PER SQUARE INCH |
| Material | STEEL COMP 630 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 4629291 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5315-01-033-6085 is a Pin,grooved,headless, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 1680-01-461-5850. Verify interchangeability with system specifications before substitution.
Key specifications for 5315-01-033-6085: Surface Finish: 63.0 MICROINCHES OVERALL; Undercut Width: 0.125 INCHES NOMINAL IN; Undercut Diameter: 0.504 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN; First End Location: BOTH ENDS. 15 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.