The Pin,grooved,headed, cataloged under National Stock Number 5315-01-030-0516, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 21 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-030-0516 |
| Item Name | Pin,grooved,headed |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES LONG SHANK |
| Undercut Width | 0.043 INCHES MINIMUM AND 0.049 INCHES MAXIMUM IN |
| First End Taper Length | 0.060 INCHES NOMINAL IN |
| Undercut Diameter | 0.704 INCHES NOMINAL IN |
| Hole Arrangement Style | BOTH END DRILLED |
| Under Head Length | 2.750 INCHES NOMINAL IN |
| First End Style | CHAMFERED |
| First Hole Diameter | 0.093 INCHES NOMINAL IN |
| Style Designator | GROOVE |
| Pin Head Diameter | 1.250 INCHES NOMINAL IN |
| Material Document and Classification | QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Diameter | 0.744 INCHES MINIMUM AND 0.748 INCHES MAXIMUM IN |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Effective Length | 2.750 INCHES NOMINAL IN |
| Second Hole Diameter | 0.093 INCHES NOMINAL IN |
| Head Style | FLAT |
| Center to Center Distance Between Holes | 0.680 INCHES NOMINAL IN |
| Height | 0.250 INCHES NOMINAL IN |
| Surface Treatment | PASSIVATE OVERALL |
| Material | STEEL COMP 302 OVERALL |
| Distance From Centerline of Hole to End of Pin | 0.680 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 1878451 | 3/9 Design control — primary reference Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier |
NSN 5315-01-030-0516 is a Pin,grooved,headed, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-01-030-0516: Surface Finish: 32.0 MICROINCHES LONG SHANK; Undercut Width: 0.043 INCHES MINIMUM AND 0.049 INCHES MAXIMUM IN; First End Taper Length: 0.060 INCHES NOMINAL IN; Undercut Diameter: 0.704 INCHES NOMINAL IN. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.