The Pin,straight,headless, cataloged under National Stock Number 5315-01-022-5391, is classified within Federal Supply Class 5315 (No Item Name Available) of the Hardware and Abrasives group. The primary manufacturer of record is Woodward, Inc.. Government technical data includes 12 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 1 commercial cross-reference from 1 manufacturer, enabling identification through both NSN and commercial part number lookups. 3 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-022-5391 |
| Primary Part Number | 214314 |
| Item Name | Pin,straight,headless |
| FSC / FSG | 5315 / 53 — No Item Name Available |
| Manufacturer | Woodward, Inc. |
| Status | ACTIVE |
| Surface Finish | 63.0 MICROINCHES OUTSIDE DIAMETER |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Hardness Rating | 30.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| Second End Relationship with First End | IDENTICAL |
| Pin Overall Length | 1.344 INCHES NOMINAL IN |
| Surface Treatment | PASSIVATE OVERALL |
| Material | STEEL COMP 416 OVERALL |
| Surface Treatment Document and Classification | S+151,FSCM 31361 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| Material Document and Classification | AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| First End Style | CHAMFERED |
| Pin Overall Diameter | 0.2470 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN |
| First End Taper Length | 0.031 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 214314 PRIMARY | Woodward, Inc. (USA) |
NSN 5315-01-022-5391 is a Pin,straight,headless, manufactured by Woodward, Inc., classified under FSC 5315 (No Item Name Available). Status: active.
NSN 5315-01-022-5391 has 1 cross-referenced part number: 214314 (Woodward, Inc.).
There are 3 known substitutes for 5315-01-022-5391: 2915-00-155-8110, 5331-00-311-9108, 5340-01-100-4539. Verify interchangeability with system specifications before substitution.
Key specifications for 214314: Surface Finish: 63.0 MICROINCHES OUTSIDE DIAMETER; First End Taper Angle: 45.0 DEGREES NOMINAL; Hardness Rating: 30.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL; Second End Relationship with First End: IDENTICAL. 12 total characteristics are documented in the Federal Logistics Information System.