The Pin,grooved,headless, cataloged under National Stock Number 5315-01-017-4330, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 14 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-017-4330 |
| Item Name | Pin,grooved,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Undercut Width | 0.052 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN |
| First End Taper Length | 0.062 INCHES NOMINAL IN |
| Undercut Diameter | 1.230 INCHES MINIMUM AND 1.238 INCHES MAXIMUM IN |
| First End Location | BOTH ENDS |
| First End Style | CHAMFERED |
| Style Designator | GROOVE |
| Material Document and Classification | QQ-S-624,COMP 4130 FED SPEC SINGLE MATERIAL RESPONSE OR AISI 4130 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Diameter | 1.312 INCHES NOMINAL IN |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Second End Relationship with First End | IDENTICAL |
| Effective Length | 5.125 INCHES NOMINAL IN |
| Second Undercut Width | 0.052 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN |
| Shear Strength | 140000 SINGLE POUNDS PER SQUARE INCH |
| Material | STEEL COMP 4130 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 7352547-01 | 5/9 Secondary reference U.S. Government activity |
| 7352547-01 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5315-01-017-4330 is a Pin,grooved,headless, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-01-017-4330: Undercut Width: 0.052 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN; First End Taper Length: 0.062 INCHES NOMINAL IN; Undercut Diameter: 1.230 INCHES MINIMUM AND 1.238 INCHES MAXIMUM IN; First End Location: BOTH ENDS. 14 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.