The Pin,grooved,headed, cataloged under National Stock Number 5315-01-015-7808, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-015-7808 |
| Item Name | Pin,grooved,headed |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES LARGE SHANK |
| Undercut Width | 0.125 INCHES NOMINAL IN |
| First End Taper Length | 0.031 INCHES NOMINAL IN |
| Undercut Diameter | 0.860 INCHES MINIMUM AND 0.870 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416,TYPE 1,CLASS 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Under Head Length | 1.031 INCHES NOMINAL IN |
| First End Style | CHAMFERED |
| Hardness Rating | 55.0 ROCKWELL C MINIMUM AND 60.0 ROCKWELL C MAXIMUM OVERALL |
| Style Designator | GROOVE |
| Pin Head Diameter | 1.373 INCHES MINIMUM AND 1.375 INCHES MAXIMUM IN |
| Material Document and Classification | QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Diameter | 0.8745 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM IN |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Head Style | FLAT |
| Height | 0.234 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OVERALL |
| Material | STEEL COMP 1117 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 63B52567-7 | 3/9 Design control — primary reference U.S. Government activity |
NSN 5315-01-015-7808 is a Pin,grooved,headed, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-01-015-7808: Surface Finish: 32.0 MICROINCHES LARGE SHANK; Undercut Width: 0.125 INCHES NOMINAL IN; First End Taper Length: 0.031 INCHES NOMINAL IN; Undercut Diameter: 0.860 INCHES MINIMUM AND 0.870 INCHES MAXIMUM IN. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.