The Pin,shoulder,headless, cataloged under National Stock Number 5315-01-014-5655, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-014-5655 |
| Item Name | Pin,shoulder,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Shank Diameter | 0.1257 INCHES MINIMUM AND 0.1260 INCHES MAXIMUM IN |
| Undercut Width | 0.018 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN |
| First End Taper Length | 0.010 INCHES NOMINAL IN |
| Undercut Diameter | 0.143 INCHES MINIMUM AND 0.146 INCHES MAXIMUM IN |
| First End Location | SHANK END |
| Surface Treatment Document and Classification | GA3023,FSCM 01714 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| First End Style | CHAMFERED |
| Hardness Rating | 30.0 ROCKWELL C MINIMUM OVERALL |
| Shank Length | 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN |
| Style Designator | UNDERCUT |
| Material Document and Classification | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Second End Relationship with First End | IDENTICAL |
| Shoulder Diameter | 0.154 INCHES MINIMUM AND 0.159 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Material | STEEL COMP 416 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| G355034 | 5/9 Secondary reference Lucent Technologies Inc Advanced Technology Systems |
| G355034 | 5/9 Secondary reference American Telephone and Telegraph Co |
| G355034 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5315-01-014-5655 is a Pin,shoulder,headless, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-01-014-5655: Shank Diameter: 0.1257 INCHES MINIMUM AND 0.1260 INCHES MAXIMUM IN; Undercut Width: 0.018 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN; First End Taper Length: 0.010 INCHES NOMINAL IN; Undercut Diameter: 0.143 INCHES MINIMUM AND 0.146 INCHES MAXIMUM IN. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.