The Pin,shoulder,headless, cataloged under National Stock Number 5315-01-006-9197, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-006-9197 |
| Item Name | Pin,shoulder,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Shank Diameter | 0.169 INCHES MINIMUM IN |
| Second Shank Diameter | 0.169 INCHES MINIMUM IN |
| Surface Finish | 125.000 MICROINCHES OVERALL |
| Undercut Width | 0.040 INCHES MINIMUM IN |
| First End Taper Length | 0.020 INCHES MINIMUM IN |
| Undercut Diameter | 0.169 INCHES MINIMUM IN |
| First End Location | BOTH ENDS |
| First End Style | CHAMFERED |
| Hardness Rating | 33.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL |
| Shank Length | 0.375 INCHES MINIMUM IN |
| Style Designator | UNDERCUT |
| Material Document and Classification | AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Second End Relationship with First End | IDENTICAL |
| Second Undercut Width | 0.040 INCHES MINIMUM IN |
| Shoulder Diameter | 0.300 INCHES MINIMUM IN |
| Second Shank Length | 0.375 INCHES MINIMUM IN |
| Second Undercut Diameter | 0.169 INCHES MINIMUM IN |
| Material | IRON ALLOY 660 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 3016T38P01 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5315-01-006-9197 is a Pin,shoulder,headless, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-01-006-9197: Shank Diameter: 0.169 INCHES MINIMUM IN; Second Shank Diameter: 0.169 INCHES MINIMUM IN; Surface Finish: 125.000 MICROINCHES OVERALL; Undercut Width: 0.040 INCHES MINIMUM IN. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.