The Pin,grooved,headless, cataloged under National Stock Number 5315-01-005-9093, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-005-9093 |
| Item Name | Pin,grooved,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Surface Finish | 125.0 MICROINCHES OVERALL |
| Undercut Width | 0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN |
| First End Taper Length | 0.015 INCHES NOMINAL IN |
| Undercut Diameter | 0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN |
| First End Location | CHAMFERED END |
| First End Style | CHAMFERED |
| Style Designator | GROOVE |
| Material Document and Classification | QQ-S-365 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Diameter | 0.230 INCHES MINIMUM AND 0.240 INCHES MAXIMUM IN |
| First End Taper Angle | 45.0 RADIANS NOMINAL |
| Second End Relationship with First End | NOT IDENTICAL |
| Effective Length | 0.1300 INCHES MINIMUM AND 0.1400 INCHES MAXIMUM IN |
| Second End Slot Depth | 0.230 INCHES NOMINAL IN |
| Second Undercut Width | 0.200 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN |
| Second End Slot Width | 0.1875 INCHES NOMINAL IN |
| Second End Style | SLOTTED |
| Material | STEEL OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 367192-1 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5315-01-005-9093 is a Pin,grooved,headless, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-01-005-9093: Surface Finish: 125.0 MICROINCHES OVERALL; Undercut Width: 0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN; First End Taper Length: 0.015 INCHES NOMINAL IN; Undercut Diameter: 0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.