The Pin,grooved,headless, cataloged under National Stock Number 5315-00-989-1208, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-989-1208 |
| Item Name | Pin,grooved,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Surface Finish | 40.0 MICROINCHES OUTSIDE DIAMETER |
| Undercut Width | 0.039 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN |
| First End Taper Length | 0.031 INCHES NOMINAL IN |
| Undercut Diameter | 0.460 INCHES MINIMUM AND 0.465 INCHES MAXIMUM IN |
| First End Location | BOTH ENDS |
| First End Style | CHAMFERED |
| Hardness Rating | 57.0 ROCKWELL C MINIMUM AND 60.0 ROCKWELL C MAXIMUM OVERALL |
| Style Designator | GROOVE |
| Diameter | 0.498 INCHES MINIMUM AND 0.499 INCHES MAXIMUM IN |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Second End Relationship with First End | IDENTICAL |
| Effective Length | 2.260 INCHES MINIMUM AND 2.270 INCHES MAXIMUM IN |
| Second Undercut Width | 0.039 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Undercut Radius | 0.005 INCHES NOMINAL IN |
| Material | STEEL COMP 440C OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 214356 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5315-00-989-1208 is a Pin,grooved,headless, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-00-989-1208: Surface Finish: 40.0 MICROINCHES OUTSIDE DIAMETER; Undercut Width: 0.039 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN; First End Taper Length: 0.031 INCHES NOMINAL IN; Undercut Diameter: 0.460 INCHES MINIMUM AND 0.465 INCHES MAXIMUM IN. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.