The Pin,straight,headless, cataloged under National Stock Number 5315-00-983-9865, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 11 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-983-9865 |
| Item Name | Pin,straight,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| First End Taper Length | 0.010 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN |
| First End Style | CHAMFERED |
| Material Document and Classification | MIL-S-7720,COND A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| First End Taper Angle | 14.5 DEGREES MINIMUM AND 15.5 DEGREES MAXIMUM |
| Pin Overall Diameter | 0.1873 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM IN |
| Pin Overall Length | 0.656 INCHES MINIMUM AND 0.688 INCHES MAXIMUM IN |
| Second End Relationship with First End | NOT IDENTICAL |
| Second End Outer Radius | 0.094 INCHES NOMINAL IN |
| Surface Treatment | PASSIVATE OVERALL |
| Second End Style | ROUND |
| Material | STEEL COMP 303 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 816488 | 3/9 Design control — primary reference U.S. Government activity |
NSN 5315-00-983-9865 is a Pin,straight,headless, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 5920-01-381-9310. Verify interchangeability with system specifications before substitution.
Key specifications for 5315-00-983-9865: First End Taper Length: 0.010 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN; First End Style: CHAMFERED; Material Document and Classification: MIL-S-7720,COND A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL; First End Taper Angle: 14.5 DEGREES MINIMUM AND 15.5 DEGREES MAXIMUM. 11 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.