PartsTable TECHNICAL DATA SHEET
NSN 5315-00-974-5851Government record, cited

Pin, Shoulder, Headless5315-00-974-5851

NSN 5315-00-974-5851 · NIIN 009745851
FSC 5315 — Nails, Machine Keys, and Pins · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5315-00-974-5851 · 5315009745851 · NIIN 009745851 · 00-974-5851 · FSC 5315 Nails, Machine Keys, and Pins
Nearby stock numbers  ·
Features
  • Pin,shoulder,headless — FSC 5315
  • Shank Diameter: 0.083 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN
  • Second Shank Diameter: 0.088 INCHES NOMINAL IN
  • First End Taper Length: 0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
  • First End Location: SMALL END
  • Surface Treatment Document and Classification: QQ-N-290,CL 1,TYPE 7 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
  • First End Style: CHAMFERED
  • Hardness Rating: 32.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
Identification
  • NSN: 5315-00-974-5851
  • NIIN: 009745851
  • FSC: 5315 — Nails, Machine Keys, and Pins
  • FSG: 53 — Hardware and Abrasives
General Description

The Pin,shoulder,headless, cataloged under National Stock Number 5315-00-974-5851, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5315-00-974-5851
Item NamePin,shoulder,headless
FSC / FSG5315 / 53 — Nails, Machine Keys, and Pins
StatusACTIVE
Shank Diameter0.083 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN
Second Shank Diameter0.088 INCHES NOMINAL IN
First End Taper Length0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
First End LocationSMALL END
Surface Treatment Document and ClassificationQQ-N-290,CL 1,TYPE 7 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
First End StyleCHAMFERED
Hardness Rating32.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
Shank Length0.200 INCHES NOMINAL IN
Style DesignatorSHOULDER
Material Document and ClassificationQQ-B-626,COMP 22,1/2H FED SPEC SINGLE MATERIAL RESPONSE OVERALL
First End Taper Angle45.0 DEGREES NOMINAL
Second End Relationship with First EndNOT IDENTICAL
Shoulder Diameter0.180 INCHES NOMINAL IN
Second Shank Length0.580 INCHES NOMINAL IN
Surface TreatmentNICKEL OVERALL
Second End StyleSQUARE
Test Data Document98230-0N088595-1 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
MaterialCOPPER ALLOY OVERALL
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
0N088595-1 3/2 Design control — primary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037
5315-00-000-1037 · Item name not on file
5315-00-000-1067
5315-00-000-1067 · Item name not on file
5315-00-000-1245
5315-00-000-1245 · Item name not on file
5315-00-000-1372
5315-00-000-1372 · Item name not on file
5315-00-000-1412
5315-00-000-1412 · Item name not on file
5315-00-001-1571
PIN
5315-00-001-1572
PIN,LINKAGE
5315-00-001-1602
5315-00-001-1602 · Item name not on file

Frequently Asked Questions

What is NSN 5315-00-974-5851?

NSN 5315-00-974-5851 is a Pin,shoulder,headless, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.

What are the specifications of 5315-00-974-5851?

Key specifications for 5315-00-974-5851: Shank Diameter: 0.083 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN; Second Shank Diameter: 0.088 INCHES NOMINAL IN; First End Taper Length: 0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN; First End Location: SMALL END. 18 specifications are documented in the U.S. Government catalog.

Is NSN 5315-00-974-5851 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com