The Pin,grooved,headed, cataloged under National Stock Number 5315-00-949-9077, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. The manufacturer of record is Gyrodyne Co of America Inc. Government technical data includes 14 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-949-9077 |
| Primary Part Number | Y63-315880-696 |
| Item Name | Pin,grooved,headed |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Manufacturer | Gyrodyne Co of America Inc |
| Status | ACTIVE |
| Undercut Width | 0.060 INCHES NOMINAL IN |
| First End Taper Length | 0.059 INCHES NOMINAL IN |
| Undercut Diameter | 0.230 INCHES MINIMUM AND 0.240 INCHES MAXIMUM IN |
| Under Head Length | 2.438 INCHES MINIMUM AND 2.442 INCHES MAXIMUM IN |
| First End Style | CHAMFERED |
| Hardness Rating | 50.0 ROCKWELL C MINIMUM AND 55.0 ROCKWELL C MAXIMUM OVERALL |
| Style Designator | GROOVE |
| Pin Head Diameter | 0.365 INCHES NOMINAL IN |
| Diameter | 0.248 INCHES MINIMUM AND 0.249 INCHES MAXIMUM IN |
| First End Taper Angle | 30.0 DEGREES NOMINAL |
| Head Style | FLAT |
| Height | 0.060 INCHES NOMINAL IN |
| Surface Treatment | PASSIVATE OVERALL |
| Material | STEEL COMP 440C OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| Y63-315880-696 PRIMARY | Gyrodyne Co of America Inc (USA) |
NSN 5315-00-949-9077 is a Pin,grooved,headed, manufactured by Gyrodyne Co of America Inc, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
NSN 5315-00-949-9077 has 1 manufacturer part number on file: Y63-315880-696 (Gyrodyne Co of America Inc).
Key specifications for Y63-315880-696: Undercut Width: 0.060 INCHES NOMINAL IN; First End Taper Length: 0.059 INCHES NOMINAL IN; Undercut Diameter: 0.230 INCHES MINIMUM AND 0.240 INCHES MAXIMUM IN; Under Head Length: 2.438 INCHES MINIMUM AND 2.442 INCHES MAXIMUM IN. 14 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.