PartsTable TECHNICAL DATA SHEET
NSN 5315-00-949-9064Government record, cited

Pin, Straight, Headed5315-00-949-9064

NSN 5315-00-949-9064 · NIIN 009499064
FSC 5315 — Nails, Machine Keys, and Pins · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5315-00-949-9064 · 5315009499064 · NIIN 009499064 · 00-949-9064 · FSC 5315 Nails, Machine Keys, and Pins
Nearby stock numbers  ·
Features
  • Pin,straight,headed — FSC 5315
  • Surface Finish: 32.0 MICROINCHES OUTSIDE DIAMETER
  • Chamfer Length: 0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: EMS 250 TY2 CLA SCM 72599 MFR REF SINGLE TREATMENT RESPONSE OVERALL
  • Hole Arrangement Style: ONE END DRILLED
  • Under Head Length: 0.645 INCHES MINIMUM AND 0.655 INCHES MAXIMUM IN
  • Pin Chamfer Angle: 43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM
  • First Hole Diameter: 0.061 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
Identification
  • NSN: 5315-00-949-9064
  • NIIN: 009499064
  • FSC: 5315 — Nails, Machine Keys, and Pins
  • FSG: 53 — Hardware and Abrasives
General Description

The Pin,straight,headed, cataloged under National Stock Number 5315-00-949-9064, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5315-00-949-9064
Item NamePin,straight,headed
FSC / FSG5315 / 53 — Nails, Machine Keys, and Pins
StatusACTIVE
Surface Finish32.0 MICROINCHES OUTSIDE DIAMETER
Chamfer Length0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationEMS 250 TY2 CLA SCM 72599 MFR REF SINGLE TREATMENT RESPONSE OVERALL
Hole Arrangement StyleONE END DRILLED
Under Head Length0.645 INCHES MINIMUM AND 0.655 INCHES MAXIMUM IN
Pin Chamfer Angle43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM
First Hole Diameter0.061 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
Hardness Rating52.0 ROCKWELL C MINIMUM AND 56.0 ROCKWELL C MAXIMUM OVERALL
Style DesignatorSTRAIGHT
Pin Head Diameter0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN
Material Document and ClassificationQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
Diameter0.156 INCHES MINIMUM AND 0.157 INCHES MAXIMUM IN
Features ProvidedCASEHARDENED
Head StylePAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION)
Height0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
Surface TreatmentANODIZE OVERALL
MaterialSTEEL COMP 440C OVERALL
Distance From Centerline of Hole to End of Pin0.100 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
97931-45 3/2 Design control — primary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037
5315-00-000-1037 · Item name not on file
5315-00-000-1067
5315-00-000-1067 · Item name not on file
5315-00-000-1245
5315-00-000-1245 · Item name not on file
5315-00-000-1372
5315-00-000-1372 · Item name not on file
5315-00-000-1412
5315-00-000-1412 · Item name not on file
5315-00-001-1571
PIN
5315-00-001-1572
PIN,LINKAGE
5315-00-001-1602
5315-00-001-1602 · Item name not on file

Frequently Asked Questions

What is NSN 5315-00-949-9064?

NSN 5315-00-949-9064 is a Pin,straight,headed, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.

What are the specifications of 5315-00-949-9064?

Key specifications for 5315-00-949-9064: Surface Finish: 32.0 MICROINCHES OUTSIDE DIAMETER; Chamfer Length: 0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN; Surface Treatment Document and Classification: EMS 250 TY2 CLA SCM 72599 MFR REF SINGLE TREATMENT RESPONSE OVERALL; Hole Arrangement Style: ONE END DRILLED. 18 specifications are documented in the U.S. Government catalog.

Is NSN 5315-00-949-9064 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com