The Pin,shoulder,headless, cataloged under National Stock Number 5315-00-942-5340, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 21 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-942-5340 |
| Item Name | Pin,shoulder,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Shank Diameter | 0.4985 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM IN |
| First End Taper Length | 0.030 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN |
| First End Location | BOTH ENDS |
| Surface Treatment Document and Classification | AMS 2406 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.600 INCHES NOMINAL IN |
| First End Style | CHAMFERED |
| Hardness Rating | 30.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL |
| Shank Length | 0.710 INCHES MINIMUM AND 0.730 INCHES MAXIMUM IN |
| Style Designator | SHOULDER |
| Material Document and Classification | AMS 5616 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Second End Relationship with First End | IDENTICAL |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.438 INCHES IN |
| Width Between Flats | 0.375 INCHES MINIMUM AND 0.378 INCHES MAXIMUM IN |
| Shoulder Diameter | 0.685 INCHES MINIMUM AND 0.686 INCHES MAXIMUM IN |
| Surface Treatment | CHROMIUM OVERALL |
| Internal Drive Style | SOCKET |
| Thread Class | 3A A |
| Material | STEEL CORROSION RESISTING OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 538046 | 5/9 Secondary reference Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney |
| 538046 | 3/9 Design control — primary reference Turbo Power & Marine System Inc Sub of United Technologies Corp |
NSN 5315-00-942-5340 is a Pin,shoulder,headless, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-00-942-5340: Shank Diameter: 0.4985 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM IN; First End Taper Length: 0.030 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN; First End Location: BOTH ENDS; Surface Treatment Document and Classification: AMS 2406 ASSN STD SINGLE TREATMENT RESPONSE OVERALL. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.