The Pin,grooved,headed, cataloged under National Stock Number 5315-00-936-9128, is classified within Federal Supply Class 5315 (No Item Name Available) of the Hardware and Abrasives group. The primary manufacturer of record is New Haven Mfg Corp. Government technical data includes 15 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 1 commercial cross-reference from 1 manufacturer, enabling identification through both NSN and commercial part number lookups. 3 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-936-9128 |
| Primary Part Number | 38306 |
| Item Name | Pin,grooved,headed |
| FSC / FSG | 5315 / 53 — No Item Name Available |
| Manufacturer | New Haven Mfg Corp |
| Status | ACTIVE |
| Diameter | 0.122 INCHES MINIMUM AND 0.124 INCHES MAXIMUM IN |
| Material Document and Classification | QQ-S-763,CLASS 303 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Style Designator | GROOVE |
| First End Taper Angle | 42.0 DEGREES MINIMUM AND 48.0 DEGREES MAXIMUM |
| Material | STEEL CORROSION RESISTING OVERALL |
| Head Style | DOUBLE CHAMFER |
| Effective Length | 0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN |
| Undercut Diameter | 0.095 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN |
| First End Style | CHAMFERED |
| Undercut Width | 0.013 INCHES MINIMUM AND 0.023 INCHES MAXIMUM IN |
| Under Head Length | 0.294 INCHES MINIMUM AND 0.304 INCHES MAXIMUM IN |
| Height | 0.020 INCHES NOMINAL IN |
| First End Taper Length | 0.010 INCHES NOMINAL IN |
| Pin Head Diameter | 0.219 INCHES NOMINAL IN |
| Surface Treatment | PASSIVATE OVERALL |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 38306 | New Haven Mfg Corp (USA) |
NSN 5315-00-936-9128 is a Pin,grooved,headed, manufactured by New Haven Mfg Corp, classified under FSC 5315 (No Item Name Available). Status: active.
NSN 5315-00-936-9128 has 1 cross-referenced part number: 38306 (New Haven Mfg Corp).
There are 3 known substitutes for 5315-00-936-9128: 2520-00-359-0036, 4820-01-196-9160, 5120-01-581-3109. Verify interchangeability with system specifications before substitution.
Key specifications for 38306: Diameter: 0.122 INCHES MINIMUM AND 0.124 INCHES MAXIMUM IN; Material Document and Classification: QQ-S-763,CLASS 303 FED SPEC SINGLE MATERIAL RESPONSE OVERALL; Style Designator: GROOVE; First End Taper Angle: 42.0 DEGREES MINIMUM AND 48.0 DEGREES MAXIMUM. 15 total characteristics are documented in the Federal Logistics Information System.