The Pin,hollow, cataloged under National Stock Number 5315-00-917-6548, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. The manufacturer of record is Goodrich Corporation. Government technical data includes 10 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-917-6548 |
| Primary Part Number | 917664-1 |
| Item Name | Pin,hollow |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Manufacturer | Goodrich Corporation |
| Status | ACTIVE |
| First End Taper Length | 0.030 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN |
| First End Style | CHAMFERED |
| Material Document and Classification | MIL-S-5000 MIL SPEC ALL MATERIAL RESPONSES OVERALL |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Pin Overall Diameter | 0.6230 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM IN |
| Pin Overall Length | 1.655 INCHES MINIMUM AND 1.675 INCHES MAXIMUM IN |
| Second End Relationship with First End | IDENTICAL |
| Inside Diameter | 0.315 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN |
| Surface Treatment | CHROMIUM OVERALL |
| Material | STEEL COMP E4340 OR STEEL COMP 4340 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 917664-1 PRIMARY | Goodrich Corporation (USA) |
| Reference | Meaning |
|---|---|
| 917664-1 | 3/9 Design control — primary reference Goodrich Corp Dba Goodrich Corp |
NSN 5315-00-917-6548 is a Pin,hollow, manufactured by Goodrich Corporation, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
NSN 5315-00-917-6548 has 1 manufacturer part number on file: 917664-1 (Goodrich Corporation).
Key specifications for 917664-1: First End Taper Length: 0.030 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN; First End Style: CHAMFERED; Material Document and Classification: MIL-S-5000 MIL SPEC ALL MATERIAL RESPONSES OVERALL; First End Taper Angle: 45.0 DEGREES NOMINAL. 10 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.