The Pin,grooved,headless, cataloged under National Stock Number 5315-00-917-2886, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-917-2886 |
| Item Name | Pin,grooved,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES OUTSIDE DIAMETER |
| Undercut Width | 0.050 INCHES NOMINAL IN |
| First End Taper Length | 0.020 INCHES NOMINAL IN |
| Undercut Diameter | 0.056 INCHES MINIMUM AND 0.061 INCHES MAXIMUM IN |
| First End Location | GROOVED END |
| Surface Treatment Document and Classification | MIL-F-14072,E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| First End Style | CHAMFERED |
| Hardness Rating | 45.0 ROCKWELL C MINIMUM AND 55.0 ROCKWELL C MAXIMUM OVERALL |
| Style Designator | GROOVE |
| Material Document and Classification | QQ-S-763,CLASS 440A FED SPEC SINGLE MATERIAL RESPONSE OVERALL A |
| Diameter | 0.1251 INCHES MINIMUM AND 0.1253 INCHES MAXIMUM IN |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Second End Relationship with First End | NOT IDENTICAL |
| Effective Length | 0.440 INCHES NOMINAL IN |
| Surface Treatment | PASSIVATE OVERALL |
| Second End Style | SQUARE |
| Material | STEEL COMP 440A OVERALL A |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 107B8051P1 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5315-00-917-2886 is a Pin,grooved,headless, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-00-917-2886: Surface Finish: 32.0 MICROINCHES OUTSIDE DIAMETER; Undercut Width: 0.050 INCHES NOMINAL IN; First End Taper Length: 0.020 INCHES NOMINAL IN; Undercut Diameter: 0.056 INCHES MINIMUM AND 0.061 INCHES MAXIMUM IN. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.