PartsTable TECHNICAL DATA SHEET
NSN 5315-00-901-5717Government record, cited

Pin, Shoulder, Headless5315-00-901-5717

NSN 5315-00-901-5717 · NIIN 009015717
FSC 5315 — Nails, Machine Keys, and Pins · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5315-00-901-5717 · 5315009015717 · NIIN 009015717 · 00-901-5717 · FSC 5315 Nails, Machine Keys, and Pins · 6-86056-1 · 6-86056-1
Nearby stock numbers  ·
Features
  • Pin,shoulder,headless — FSC 5315
  • Shank Diameter: 0.308 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
  • Surface Finish: 125.000 MICROINCHES OVERALL
  • First End Taper Length: 0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
  • First End Location: BOTH ENDS
  • Thread Length: 0.460 INCHES MINIMUM AND 0.540 INCHES MAXIMUM IN
  • First End Style: CHAMFERED
  • Shank Length: 1.080 INCHES MINIMUM AND 1.160 INCHES MAXIMUM IN
Identification
  • NSN: 5315-00-901-5717
  • NIIN: 009015717
  • FSC: 5315 — Nails, Machine Keys, and Pins
  • FSG: 53 — Hardware and Abrasives
General Description

The Pin,shoulder,headless, cataloged under National Stock Number 5315-00-901-5717, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5315-00-901-5717
Item NamePin,shoulder,headless
FSC / FSG5315 / 53 — Nails, Machine Keys, and Pins
StatusACTIVE
Shank Diameter0.308 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
Surface Finish125.000 MICROINCHES OVERALL
First End Taper Length0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
First End LocationBOTH ENDS
Thread Length0.460 INCHES MINIMUM AND 0.540 INCHES MAXIMUM IN
First End StyleCHAMFERED
Shank Length1.080 INCHES MINIMUM AND 1.160 INCHES MAXIMUM IN
Style DesignatorSHOULDER
Material Document and ClassificationMIL-S-6758 COND F4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
First End Taper Angle44.5 DEGREES MINIMUM AND 45.5 DEGREES MAXIMUM
Second End Relationship with First EndIDENTICAL
Thread DirectionRIGHT-HAND
Nominal Thread Size0.312 INCHES IN
Shoulder Diameter0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
Surface TreatmentCADMIUM OVERALL
Thread Class3A A
MaterialSTEEL COMP 4130 OVERALL
Thread Series DesignatorUNIFIED NATIONAL COARSE (UNC)
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
6-86056-1 C/1 Advisory reference — outside the item-of-supply concept
Northrop Grumman Technical Services, Inc. Dba Defense Systems Sector
6-86056-1 3/9 Design control — primary reference
Northrop Grumman Systems Corporation Dba Northrop Grumman Is Div Northrop Grumman Aeronautics Systems
No interchangeability data on file.
Other items in FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037
5315-00-000-1037 · Item name not on file
5315-00-000-1067
5315-00-000-1067 · Item name not on file
5315-00-000-1245
5315-00-000-1245 · Item name not on file
5315-00-000-1372
5315-00-000-1372 · Item name not on file
5315-00-000-1412
5315-00-000-1412 · Item name not on file
5315-00-001-1571
PIN
5315-00-001-1572
PIN,LINKAGE
5315-00-001-1602
5315-00-001-1602 · Item name not on file

Frequently Asked Questions

What is NSN 5315-00-901-5717?

NSN 5315-00-901-5717 is a Pin,shoulder,headless, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.

What are the specifications of 5315-00-901-5717?

Key specifications for 5315-00-901-5717: Shank Diameter: 0.308 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN; Surface Finish: 125.000 MICROINCHES OVERALL; First End Taper Length: 0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN; First End Location: BOTH ENDS. 18 specifications are documented in the U.S. Government catalog.

Is NSN 5315-00-901-5717 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com