The Pin,grooved,headless, cataloged under National Stock Number 5315-00-891-8384, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 15 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-891-8384 |
| Item Name | Pin,grooved,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Undercut Width | 0.056 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN |
| First End Taper Length | 0.022 INCHES MINIMUM AND 0.044 INCHES MAXIMUM IN |
| Undercut Diameter | 1.191 INCHES MINIMUM AND 1.199 INCHES MAXIMUM IN |
| First End Location | BOTH ENDS |
| Surface Treatment Document and Classification | BPS FW4436,FSCM 97499 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| First End Style | CHAMFERED |
| Criticality Code Justification | ABMZ |
| Style Designator | GROOVE |
| Material Document and Classification | AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Diameter | 1.2485 INCHES MINIMUM AND 1.2495 INCHES MAXIMUM IN |
| First End Taper Angle | 30.0 DEGREES NOMINAL |
| Second End Relationship with First End | IDENTICAL |
| Effective Length | 3.340 INCHES MINIMUM AND 3.345 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OVERALL |
| Material | STEEL OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 540-011-112-7 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5315-00-891-8384 is a Pin,grooved,headless, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-00-891-8384: Undercut Width: 0.056 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN; First End Taper Length: 0.022 INCHES MINIMUM AND 0.044 INCHES MAXIMUM IN; Undercut Diameter: 1.191 INCHES MINIMUM AND 1.199 INCHES MAXIMUM IN; First End Location: BOTH ENDS. 15 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.