The Pin,shoulder,headless, cataloged under National Stock Number 5315-00-848-7133, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 13 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-848-7133 |
| Item Name | Pin,shoulder,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Shank Diameter | 0.1878 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN |
| First End Taper Length | 0.020 INCHES NOMINAL IN |
| First End Location | SHOULDER END |
| First End Style | CHAMFERED |
| Hardness Rating | 35.0 ROCKWELL C NOMINAL OVERALL |
| Shank Length | 0.093 INCHES NOMINAL IN |
| Style Designator | SHOULDER |
| Material Document and Classification | MIL-S-6050 COND F4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Second End Relationship with First End | NOT IDENTICAL |
| Shoulder Diameter | 0.250 INCHES NOMINAL IN |
| Second End Style | SQUARE |
| Material | STEEL COMP 8630 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 341886 | 3/2 Design control — primary reference U.S. Government activity |
| 124G349-9 | 5/9 Secondary reference Northrop Grumman Systems Corporation |
NSN 5315-00-848-7133 is a Pin,shoulder,headless, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 5315-01-699-8625. Verify interchangeability with system specifications before substitution.
Key specifications for 5315-00-848-7133: Shank Diameter: 0.1878 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN; First End Taper Length: 0.020 INCHES NOMINAL IN; First End Location: SHOULDER END; First End Style: CHAMFERED. 13 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.