The Pin,grooved,headed, cataloged under National Stock Number 5315-00-832-6784, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-832-6784 |
| Item Name | Pin,grooved,headed |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES OVERALL |
| Undercut Width | 0.039 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN |
| First End Taper Length | 0.016 INCHES NOMINAL IN |
| Undercut Diameter | 0.303 INCHES MINIMUM AND 0.306 INCHES MAXIMUM IN |
| Under Head Length | 2.468 INCHES NOMINAL IN |
| First End Style | CHAMFERED |
| Style Designator | GROOVE |
| Pin Head Diameter | 0.562 INCHES NOMINAL IN |
| Diameter | 0.3745 INCHES MINIMUM AND 0.3748 INCHES MAXIMUM IN |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Effective Length | 2.322 INCHES MINIMUM AND 2.324 INCHES MAXIMUM IN |
| Head Style | FLAT |
| Second Undercut Width | 0.344 INCHES NOMINAL IN |
| Height | 0.094 INCHES NOMINAL IN |
| Second Undercut Diameter | 0.031 INCHES NOMINAL IN |
| Material | ALUMINUM ALLOY 6061 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| SM-C-601288 | 3/2 Design control — primary reference U.S. Government activity |
| SMB601254 | 5/2 Secondary reference U.S. Government activity |
| SMC601288-7 | 5/9 Secondary reference U.S. Government activity |
NSN 5315-00-832-6784 is a Pin,grooved,headed, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-00-832-6784: Surface Finish: 32.0 MICROINCHES OVERALL; Undercut Width: 0.039 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN; First End Taper Length: 0.016 INCHES NOMINAL IN; Undercut Diameter: 0.303 INCHES MINIMUM AND 0.306 INCHES MAXIMUM IN. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.