The Pin,straight,headed, cataloged under National Stock Number 5315-00-764-6339, is classified within Federal Supply Class 5315 (No Item Name Available) of the Hardware and Abrasives group. The primary manufacturer of record is Hartwell Corporation. Government technical data includes 14 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 1 commercial cross-reference from 1 manufacturer, enabling identification through both NSN and commercial part number lookups. 1 verified substitute exists in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-764-6339 |
| Primary Part Number | 104218-1 |
| Item Name | Pin,straight,headed |
| FSC / FSG | 5315 / 53 — No Item Name Available |
| Manufacturer | Hartwell Corporation |
| Status | ACTIVE |
| Head Style | FLAT COUNTERSUNK UNDERCUT |
| Chamfer Length | 0.010 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN |
| Diameter | 0.124 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN |
| Hole Arrangement Style | ONE END DRILLED |
| Material | STEEL CORROSION RESISTING OVERALL |
| Material Document and Classification | IL-S-7720 MIL SPEC 10TH MATERIAL RESPONSE OVERALL |
| Height | 0.026 INCHES MINIMUM AND 0.031 INCHES MAXIMUM IN |
| Head Countersink Angle | 100.0 DEGREES NOMINAL |
| Style Designator | STRAIGHT |
| First Hole Diameter | 0.0350 INCHES MINIMUM AND 0.0356 INCHES MAXIMUM IN |
| Pin Head Diameter | 0.188 INCHES NOMINAL IN |
| Distance From Centerline of Hole to End of Pin | 0.070 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN |
| Pin Chamfer Angle | 45.0 DEGREES NOMINAL |
| Under Head Length | 0.348 INCHES MINIMUM AND 0.353 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 104218-1 PRIMARY | Hartwell Corporation (USA) |
NSN 5315-00-764-6339 is a Pin,straight,headed, manufactured by Hartwell Corporation, classified under FSC 5315 (No Item Name Available). Status: active.
NSN 5315-00-764-6339 has 1 cross-referenced part number: 104218-1 (Hartwell Corporation).
There is 1 known substitute for 5315-00-764-6339: 5950-00-306-0903. Verify interchangeability with system specifications before substitution.
Key specifications for 104218-1: Head Style: FLAT COUNTERSUNK UNDERCUT; Chamfer Length: 0.010 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN; Diameter: 0.124 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN; Hole Arrangement Style: ONE END DRILLED. 14 total characteristics are documented in the Federal Logistics Information System.