The Pin,grooved,headed, cataloged under National Stock Number 5315-00-726-1789, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 14 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-726-1789 |
| Item Name | Pin,grooved,headed |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Undercut Width | 0.017 INCHES NOMINAL IN |
| First End Taper Length | 0.030 INCHES NOMINAL IN |
| Undercut Diameter | 0.1735 INCHES MINIMUM AND 0.1765 INCHES MAXIMUM IN |
| Under Head Length | 1.000 INCHES NOMINAL IN |
| Head Countersink Angle | 100.0 DEGREES NOMINAL |
| First End Style | CHAMFERED |
| Style Designator | GROOVE |
| Pin Head Diameter | 0.329 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN |
| Material Document and Classification | MIL-S-5000 MIL SPEC ALL MATERIAL RESPONSES OVERALL |
| Diameter | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Effective Length | 0.904 INCHES NOMINAL IN |
| Head Style | FLAT COUNTERSUNK (INCLUDED ANGLE LESS THAN 135 DEG) |
| Material | STEEL COMP E4340 OR STEEL COMP 4340 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 2-25126-3 | 3/9 Design control — primary reference Northrop Grumman Systems Corporation Dba Northrop Grumman Is Div Northrop Grumman Aeronautics Systems |
| 2-25126-3 | C/1 Advisory reference — outside the item-of-supply concept Northrop Grumman Technical Services, Inc. Dba Defense Systems Sector |
NSN 5315-00-726-1789 is a Pin,grooved,headed, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-00-726-1789: Undercut Width: 0.017 INCHES NOMINAL IN; First End Taper Length: 0.030 INCHES NOMINAL IN; Undercut Diameter: 0.1735 INCHES MINIMUM AND 0.1765 INCHES MAXIMUM IN; Under Head Length: 1.000 INCHES NOMINAL IN. 14 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.