PartsTable TECHNICAL DATA SHEET
NSN 5315-00-721-7804Government record, cited

Pin, Grooved, Headed5315-00-721-7804

NSN 5315-00-721-7804 · NIIN 007217804 · Part number 9019797
Us Army Aviation and Missile Command · FSC 5315 — Nails, Machine Keys, and Pins · FSG 53 — Hardware and Abrasives · CAGE 18876
Government record, cited
NSN 5315-00-721-7804 — this item is cataloged by the U.S. Government under National Stock Number 5315-00-721-7804. Manufacturer of record part number: 9019797.
Also searched as  5315-00-721-7804 · 5315007217804 · NIIN 007217804 · 00-721-7804 · FSC 5315 Nails, Machine Keys, and Pins · CAGE 18876 · 9019797
Nearby stock numbers  ·
Features
  • Pin,grooved,headed — FSC 5315
  • Surface Finish: 63.0 MICROINCHES LONG SHANK
  • Undercut Width: 0.031 INCHES NOMINAL IN
  • First End Taper Length: 0.094 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN
  • Undercut Diameter: 0.162 INCHES MINIMUM AND 0.182 INCHES MAXIMUM IN
  • Under Head Length: 0.781 INCHES MINIMUM AND 0.844 INCHES MAXIMUM IN
  • First End Style: CHAMFERED
  • Style Designator: GROOVE
Identification
  • NSN: 5315-00-721-7804
  • NIIN: 007217804
  • FSC: 5315 — Nails, Machine Keys, and Pins
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: 9019797
  • Manufacturer: Us Army Aviation and Missile Command
General Description

The Pin,grooved,headed, cataloged under National Stock Number 5315-00-721-7804, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. The manufacturer of record is Us Army Aviation and Missile Command. Government technical data includes 14 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5315-00-721-7804
Primary Part Number9019797
Item NamePin,grooved,headed
FSC / FSG5315 / 53 — Nails, Machine Keys, and Pins
ManufacturerUs Army Aviation and Missile Command
StatusACTIVE
Surface Finish63.0 MICROINCHES LONG SHANK
Undercut Width0.031 INCHES NOMINAL IN
First End Taper Length0.094 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN
Undercut Diameter0.162 INCHES MINIMUM AND 0.182 INCHES MAXIMUM IN
Under Head Length0.781 INCHES MINIMUM AND 0.844 INCHES MAXIMUM IN
First End StyleCHAMFERED
Style DesignatorGROOVE
Pin Head Diameter0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN
Material Document and ClassificationQQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
Diameter0.200 INCHES MINIMUM AND 0.202 INCHES MAXIMUM IN
First End Taper Angle29.0 DEGREES MINIMUM AND 31.0 DEGREES MAXIMUM
Head StyleFLAT
Height0.094 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN
MaterialALUMINUM ALLOY 6061 OVERALL
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
9019797 PRIMARY Us Army Aviation and Missile Command (USA)
No interchangeability data on file.
Other items in FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037
5315-00-000-1037 · Item name not on file
5315-00-000-1067
5315-00-000-1067 · Item name not on file
5315-00-000-1245
5315-00-000-1245 · Item name not on file
5315-00-000-1372
5315-00-000-1372 · Item name not on file
5315-00-000-1412
5315-00-000-1412 · Item name not on file
5315-00-001-1571
PIN
5315-00-001-1572
PIN,LINKAGE
5315-00-001-1602
5315-00-001-1602 · Item name not on file

Frequently Asked Questions

What is NSN 5315-00-721-7804?

NSN 5315-00-721-7804 is a Pin,grooved,headed, manufactured by Us Army Aviation and Missile Command, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.

What part numbers are listed for NSN 5315-00-721-7804?

NSN 5315-00-721-7804 has 1 manufacturer part number on file: 9019797 (Us Army Aviation and Missile Command).

What are the specifications of 9019797?

Key specifications for 9019797: Surface Finish: 63.0 MICROINCHES LONG SHANK; Undercut Width: 0.031 INCHES NOMINAL IN; First End Taper Length: 0.094 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN; Undercut Diameter: 0.162 INCHES MINIMUM AND 0.182 INCHES MAXIMUM IN. 14 specifications are documented in the U.S. Government catalog.

Is NSN 5315-00-721-7804 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com