The Pin,grooved,headless, cataloged under National Stock Number 5315-00-716-1906, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 13 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-716-1906 |
| Item Name | Pin,grooved,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Undercut Width | 0.200 INCHES MINIMUM AND 0.230 INCHES MAXIMUM IN |
| First End Taper Length | 0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN |
| Undercut Diameter | 0.177 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN |
| First End Location | BOTH ENDS |
| First End Style | CHAMFERED |
| Hardness Rating | 43.0 ROCKWELL C MINIMUM AND 48.0 ROCKWELL C MAXIMUM OVERALL |
| Style Designator | GROOVE |
| Diameter | 0.216 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN |
| First End Taper Angle | 44.0 DEGREES MINIMUM AND 46.0 DEGREES MAXIMUM |
| Second End Relationship with First End | IDENTICAL |
| Effective Length | 4.354 INCHES NOMINAL IN |
| Surface Treatment | PHOSPHATE OVERALL |
| Material | STEEL OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 7161906 | 5/9 Secondary reference Army, United States Department of the Dba Rock Island Arsenal Jmtc |
| 7161906 | 3/9 Design control — primary reference Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier |
NSN 5315-00-716-1906 is a Pin,grooved,headless, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-00-716-1906: Undercut Width: 0.200 INCHES MINIMUM AND 0.230 INCHES MAXIMUM IN; First End Taper Length: 0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN; Undercut Diameter: 0.177 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN; First End Location: BOTH ENDS. 13 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.